Grizzly G0888, Owner'S Manual

Page: 14 / 36

-12-
Model G0888 (Mfd. Since 01/19)
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Fasteners (Figure 4) Qty
L. Hex Bolts
1
⁄
4
"-20 x
3
⁄
4
" ............................... 20
M. Flat Washers
1
⁄
4
" ....................................... 20
N. Cable Ties 6" .............................................. 3
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Loose Components (Figure 3) Qty
B. LED Work Light w/Mounting Clamps ......... 1
C. Work Light Support .................................... 1
D. Dust Inlet .................................................... 1
E. Rubber Gasket ........................................... 1
F. Flexible Hoses 2
1
⁄
2
" x 11" ........................... 2
G. Grinder Mounting Plate .............................. 1
H. Hose Clamps 2
1
⁄
2
" ...................................... 4
I. Swivel Casters ............................................ 2
J. Locking Swivel Casters .............................. 2
K. Coolant Cups .............................................. 2
Stand Assembly (Figure 2) Qty
A. Stand Assembly ......................................... 1
—Collection Drawer ................................... 1
—Collection Tray ........................................ 1
—Air Filter Drawer ...................................... 1
—Aluminum-Framed Air Filter .................... 1
Figure 2. Stand assembly.
Figure 4. Fastener inventory.
N
M
L
A
Figure 3. Loose component inventory.
B C
D E
F
G H I J K