Grizzly G0888, Owner'S Manual

Page: 21 / 36

Model G0888 (Mfd. Since 01/19)
-19-
SECTION 4: OPERATIONS
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
To use bench grinding station:
1. Attach grinder (not provided) to mounting
plate.
2. Connect dust hose(s) to grinder and secure
with hose clamps.
3. Connect auxiliary electrical outlet to power.
4. Plug grinder into auxiliary electrical outlet.
5. Connect grinding station to power.
6. Turn grinding station ON.
7. Turn grinder ON and perform operation.
8. When operation is complete, turn grinder
OFF, then turn grinding station OFF.
Never operate machine with damaged or
worn parts. Never operate machine with
drawers or filter removed.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Operation
This deluxe bench grinding station draws sparks
and metal dust into a collection drawer (see
Figure
17) and discharges air through a 10-micron air fil-
ter housed in a separate drawer.
The motor ON/STOP switch and LED light switch
are housed in the electrical box at the front of the
machine. The auxiliary electrical box on the left-
hand side of the machine is equipped with two
115V outlets and a power cord to make plugging
in a grinder a simple process.
IMPORTANT: Wear NIOSH-approved respirator,
ANSI-approved safety goggles and leather gloves
whenever checking or emptying collection drawer
or air filter drawer. Keep metal dust off clothing
and skin.
Eye and face injuries and respiratory prob-
lems can occur while operating this tool.
Wear personal protective equipment to
reduce your risk from these hazards.
Figure 17. Operations components.
Collection
Drawer
Air Filter
Drawer
Auxiliary
Electrical Box
Light
Switch
ON/STOP
Switch