Grizzly G0888 Owner'S Manual Download Page 34

Page: 34 / 36

-32-

Model G0888 (Mfd. Since 01/19)

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

WARNING!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

To reduce risk of death

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

INJURY/SHOCK

HAZARD!

Disconnect power

before adjustments,

maintenance,

service, or opening.

G0888

101

102

CAUTION!

FIRE/EXPLOSION

HAZARD!

To minimize risk, ensure

machine is properly set

up, cleaned, and only

used to collect

non-combustible metals.

103

104

105

106

107

108

109

110

111

grizzly.com

106

Specifications

MODEL G0888

DELUXE BENCH

GRINDING STATION

Motor: 1 HP, 115V, 1-Ph, 60 Hz, 9A

Filter Size: 14-3/4" x 14-3/4" x 2-1/2"

Filter: 99% of 10 Microns (MERV 9)

Airflow Performance: 280 CFM

Main Inlet Size: 2-1/2"

Impeller: 11" x 1/8"

Weight: 218 lbs.

To reduce risk of serious personal injury when using:

1. Read and understand owner’s manual before operating.

2. Always wear approved eye protection and respirator.

3. Only plug power cord into a grounded outlet.

4. Disconnect power before servicing or changing filter.

5. Remove dust/chips at the end of each day.

6. Do not expose to rain or use in damp areas.

7. Do not make unapproved modifications to bench grinding

station, or use without filter in place.

8. Never leave machine unattended during operation.

9. Do not use if cord, plug, or any other electrical equipment

becomes damaged—promptly repair!

10. Prevent unauthorized use by children or untrained users.

Mfd. for Grizzly in Taiwan

WARNING!

265752

Serial #

Date

Labels & Cosmetics

REF PART #

DESCRIPTION

REF PART #

DESCRIPTION

101

P0888101

MACHINE ID LABEL

107

P0888107

GRIZZLY.COM LABEL

102

P0888102

GLASSES/RESPIRATOR LABEL

108

P0888108

MODEL NUMBER LABEL

103

P0888103

EXPLOSION HAZARD LABEL

109

P0888109

READ MANUAL LABEL

104

P0888104

TOUCH-UP PAINT, GRIZZLY PUTTY

110

P0888110

DISCONNECT POWER LABEL

105

P0888105

TOUCH-UP PAINT, GRIZZLY GREEN

111

P0888111

GRIZZLY NAMEPLATE (MINI)

106

P0888106

ELECTRICITY LABEL

Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes

off or becomes unreadable, the owner of this machine MUST replace it in the original location

before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.

Summary of Contents for G0888





































Search results

Summary of Contents for G0888

Reviews:

Related manuals for G0888

Brands by name

Popular brands

Grizzly G0888, Owner'S Manual

Search results

Summary of Contents for G0888

Reviews:

Related manuals for G0888

Brands by name

Popular brands