-44-
Model G0860/G0861/G0862 (Mfd. Since 10/18)
Removing/Replacing
Canister Filter & Bag
Items Needed Qty
An Assistant ...................................................... 1
Wrench or Socket, 12mm .................................. 1
Wrench or Socket, 10mm .................................. 1
Hex Wrench, 5mm ............................................. 1
Shop Vac ........................................................... 1
Canister Filter T30314 (Models G0860, G0861) 1
Canister Filter T30315 (Model G0862) .............. 1
Filter Bag T27900 .............................................. 1
To remove and replace filter bag and canister
filter:
1. DISCONNECT MACHINE FROM POWER!
2. Release bag clamp, then remove filter bag
(see
Figure 68). Tie bag closed.
If the canister filter is clogged or dirty and cleaning
it does not improve dust-collection performance,
the canister filter must be replaced.
3. Loosen M6-1 x 16 hex bolt on filter cleaning
handle, then remove handle (see
Figure 69).
5. Loosen (2) M6-1 x 16 cap screws on paddle
handle spindle to remove (see
Figure 71).
Figure 71. Separating paddle handle spindle
from filter paddle spindle.
Figure 69. Filter cleaning handle hex bolt.
4. Remove (6)
5
⁄
16
"-18 x
3
⁄
4
" flange bolts securing
filter paddle cover to impeller housing, then
lift cover over spindle (see
Figure 70).
Figure 68. Filter bag components.
Bag
Clamp
Filter
Bag
Canister
Filter
Filter
Cleaning
Handle
Hex Bolt
Figure 70. Removing filter paddle cover.
Spindle
x 6
x 2
Paddle
Handle
Spindle
Filter
Paddle
Cover
Dust exposure created
while using machinery
may cause cancer, birth
defects, or long-term respi-
ratory damage. Always
wear goggles and a NIOSH-
approved respirator when
working with the dust col-
lection bags or canisters.
