Model G0860/G0861/G0862 (Mfd. Since 10/18)
-21-
Assembly
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
2. Attach each support leg to base, as shown
in
Figure 10, and finger-tighten with (8)
5
⁄
16
"-
18 x
3
⁄
4
" button head cap screws and (8)
5
⁄
16
"
fender washers.
Note: For Models G0860 and G0861, install
support leg with FIX SWITCH HERE sticker
on left side of base. For Model G0862, install
support leg with FIX SWITCH HERE sticker
on right side of base.
To assemble dust collector:
1. Attach (4) 2
1
⁄
2
" locking swivel casters to bot-
tom of base, and secure each caster with (4)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts (see
Figure 9).
3. Attach lock handle guide with stop plate to left
side of base stand, and finger-tighten with (2)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts (see
Figure 11).
Figure 9. Locking swivel caster (1 of 4) attached
to base.
Figure 10. Support legs attached to base.
x 4
x 8
Figure 11. Lock handle guide with stop plate
attached to base.
Lock Handle
Guide w/Stop
Plate
x 2
4. Repeat Step 3 to attach second lock handle
guide to right side of base.
IMPORTANT: When assembling any components
with a gasket, tighten fasteners in an alternating
star pattern for an even seal (see
Figure 8).
1
2
3
4
5
6
7
8
Figure 8. Alternating star tightening pattern.
