Grizzly G0845P Owner'S Manual Download Page 34 | Manualshive

Page: 34 / 68

background image

-32-

Model G0845P (Mfd. Since 01/18)

SECTION 6: MAINTENANCE

Schedule

To reduce risk of shock or

accidental startup, always

disconnect machine from

power before adjustments,

maintenance, or service.

Cleaning  the  Model  G0845P  is  relatively  easy.
Protect  the  unpainted  cast-iron  bed  by  wiping  it
clean after every use. Keep the bed rust-free with
regular  applications  of  products  like  G96

®

Gun

Treatment, SLIPIT

®

, or Boeshield

®

T-9 (see

Page

31 for more details).

The Model G0845P has 10 grease fittings that are
used to lubricate moving parts of the machine with
Grizzly T26419—Syn-o-Gen High Speed Bearing
Grease.

Lubrication

Cleaning &

Protecting

For optimum performance from this machine, this
maintenance schedule must be strictly followed.

Ongoing
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below, shut down the machine immediately
and fix the problem before continuing operations:

•

Loose mounting bolts.

•

Damaged blades.

•

Worn or damaged wires.

•

Any other unsafe condition.

Every 8 Hours
•

Lubricate the upper blade frame and gibs
(

Page 33).

Every Month
•

Lubricate the eccentric cam copper bushings
(

Page 33).

•

Lubricate the rear work stop support rods and
gear racks (

Page 34).

•

Lubricate the connecting rod pin shafts
(

Page 34).

•

Inspect V-belts for tension, damage, or wear
(

Page 46).

•

Clean/vacuum dust buildup from inside cabi-
net and off motor.

Every 6 Months
•

Lubricate the main shaft roller bearings
(

Page 35).

•

Change the gearbox oil (

Page 35).

Grease fittings for the gibs are on the upper blade
frame. Grease fittings for the main shaft bearings
and eccentric gear copper bushings are acces-
sible behind the front cover.

The connecting rod pin shafts are located just
above the rear cover.

For the oil-bath gearbox, use Grizzly T27914—
Moly-D Machine and Way Oil ISO 68. Changing
the gearbox oil requires removal of the front cover
and rear cover.

Figure 43. Recommended lubricants for Model

G0845P.

T26419

T27914

«
...
32
33
34
35
36
...
»

Summary of Contents for G0845P





































































Reviews:

No comments

Related manuals for G0845P

Brand: BGS technic Pages: 12

Brand: Ironton Pages: 21

Brand: HOZAN Pages: 2

Brand: Swagelok Pages: 6

Brand: Array electronic Pages: 73

Brand: OCZ Pages: 8

Brand: Huskie Tools Pages: 12

Brand: Whyte Pages: 12

Brand: Parkside Pages: 18

IQV20 W7002 Series

Brand: Ingersoll-Rand Pages: 56

Brand: Worldwide Pages: 2

Brute Platinum XLT Tapper

Brand: Champion Pages: 12

Brand: Omer Pages: 2

Belleta iPB Series

Brand: TDK Pages: 2

Brand: Parkside Pages: 44

Brand: Clarke Pages: 2

Brand: Cornwell Tools Pages: 4

Brand: BJLive Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands