Model G0832 (Mfd. Since 04/17)
-5-
Internal Components
Workpiece
Figure 4. Workpiece path and major planing components (side cutaway view).
A
B
D
C
A. Infeed Roller: Rotates with the direction
of feed to pull the workpiece toward the
cutterhead.
B. Cutterhead: Holds the knives that remove
material from the workpiece. Rotates opposite
the direction of feed.
C. Outfeed Roller: Rotates with the direction of
feed to pull the workpiece through the planer.
D. Planer Table: Provides a smooth, flat sur-
face for the workpiece to slide against as
it moves through planer. Planer extension
tables fold up and down for mobility.
Like all machinery there is potential danger when operating this machine. Accidents are fre-
quently caused by lack of familiarity or failure to pay attention. Use this machine with respect
and caution to decrease the risk of operator injury. If normal safety precautions are overlooked
or ignored, serious personal injury may occur.
Front
Rear
Summary of Contents for G0832
Page 52: ......
