-30-
Model G0832 (Mfd. Since 04/17)
Feed Roller Chain Drive
Items Needed
Qty
Grease .....T23964 NLGI#2 or Equivalent Grease
Frequency ................................................Monthly
Hex Wrench 4mm .............................................. 1
To lubricate feed roller chain drive:
1. DISCONNECT MACHINE FROM POWER!
2. Remove (4) M8-1.25 x 12 button head cap
screws from top of column cover.
3. Remove side cover to expose sprockets and
chains (see
Figure 33).
Headstock Height Chain
Items Needed
Qty
Grease .....T23964 NLGI#2 or Equivalent Grease
Frequency ................................................Monthly
To lubricate table height chain:
1. DISCONNECT MACHINE FROM POWER!
2. Gently tilt machine onto its side (see Figure
34) to expose chain.
4. Use mineral spirits, stiff brush, and shop rags
to clean old grease from chains.
5. Apply light coating of grease to chain linkage
and sprockets.
6. Re-install side cover.
Figure 33. Cutterhead elevation leadscrews and
feed roller drive chain exposed for lubricating.
3. Use mineral spirits, stiff brush, and shop rags
to clean old grease from chain.
4. Apply light coating of grease to chain linkage
and sprockets.
5. Tilt machine back onto base.
Figure 34. Headstock height chain and
sprockets exposed for lubricating.
Sprockets
Sprockets
Feed Roller Chain
Summary of Contents for G0832
Page 52: ......
