-4-
Model G0809 (Mfd. Since 1/17)
Controls &
Components
Refer to
Figures 1–4 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Figure 1. Planer controls and components.
A. ON/OFF Paddle Switch: Turns motor ON
and
OFF. Insert disabling pin to lock ON/OFF
switch.
B. Return Rollers (1 of 2): Easily slide workpiece
back to operator following planing operation.
C. Table Elevation Handwheel: Raises and
lowers table. Turning handle one full rotation
raises or lowers table
1
⁄
16
". Turning handle
clockwise raises table; turning handle coun-
terclockwise lowers it.
D. Feed Rate Control Dial: Switches between
15 FPM and 30 FPM feed rate.
E. Dust Hood: Funnels wood chips and saw-
dust into dust collection port.
Figure 2. Main table controls, fence, and foot
pedal caster.
F. Fence: Guides workpiece as it moves across
cutterhead; determines angle of cut.
G. Cutterhead Guard: Covers cutterhead
until pushed out of the way by workpiece
during operation. When workpiece leaves
cutterhead, guard springs back to its starting
position.
H. Fence Tilt Handle: Tilts fence throughout its
range of motion from 45° inward to 45° out-
ward (135°).
I. Fence Lock Knob: Locks fence in place
across width of jointer tables.
J. Fence Angle Lock Lever: Loosens to adjust
fence from 45° inward to 45° outward (135°),
and tightens to secure angle setting.
K. Infeed Table: Supports workpiece before it
reaches cutterhead. Position of infeed table
relative to cutterhead determines depth of
cut.
L. Infeed Table Handwheel: Adjusts position
of infeed table (when infeed table lock is
loosened).
M. Outfeed Table Lock: Loosens to allow
adjustment of outfeed table height relative to
infeed table and rabbeting table.
F
A
B
C
E
G
H
I
K
L
D
M
J
Summary of Contents for G0809
Page 72: ......
