-52-
Model G0809 (Mfd. Since 1/17)
Setting 135° Fence Stop
1. Loosen fence-angle lock lever (see Figure
72), and use a combination square adjusted
to 135˚ to adjust fence to 135˚ (45˚ outward)
position, as shown in
Figure 74.
3. Adjust 135˚ stop bolt and jam nut until bolt
makes contact with back of fence, then re-
check fence angle with square.
4. Retighten lock lever loosened in Step 1 and,
if needed, adjust angle indicator by loosening
screw aligning indicator with 135˚ mark on
angle scale, then re-tightening screw.
2. Check angle scale to verify 135˚ setting (see
Figure 75).
— If fence stops at 135˚, no further adjust-
ment is needed. Retighten fence-angle
lock lever.
— If fence does not stop exactly at 135˚, stop
bolt (see
Figure 75) requires adjustment.
Proceed to
Step 3.
Figure 74. Fence adjusted to 135˚ (45˚ outward).
Combination
Square
Figure 75. Location of 135˚ stop bolt and
jam nut.
135°
135° Stop
Bolt
Jam Nut
Setting 45° Fence Stop
1. Loosen fence-angle lock lever (see Figure
72), and use the 135˚ side of a combination
square to adjust fence to 135˚ (45˚ inward)
position, as shown in
Figure 76.
3. Adjust 45˚ stop screw and jam nut (see
Figure 77) until fence face rests evenly on
combination square.
4. Re-tighten lock lever loosened in Step 1 and,
if needed, adjust angle indicator by loosening
screw to align with 45˚ mark on angle scale,
then re-tightening screw.
2. Check angle scale to verify 45˚ setting.
— If fence stops at 45˚, no further adjustment
is needed. Retighten fence-angle lock
lever.
— If fence does not stop exactly at 45˚, stop
screw (see
Figure 77) requires adjust-
ment. Proceed to Step 3.
Figure 76. Fence adjusted 45˚ inward.
Combination
Square
Figure 77. Location of 45˚ stop bolt and jam nut.
Fence Angle
Lock Lever
Set Screw
& Jam Nut
Summary of Contents for G0809
Page 72: ......
