Model G0809 (Mfd. Since 1/17)
-21-
4. With the help of an assistant, tip machine
enough to allow placement of two 4x4 blocks
under backside of cabinet (see
Figure 13),
then remove access panels.
Figure 13. 4x4 block placement.
5. Attach (2) wheels to backside of cabinet with
pre-installed hex bolts, lock washers, lock
nuts, and wheel sleeves (see
Figure 14).
With help from an assistant, remove wood
blocks and lower machine.
Figure 14. Wheel installation at backside of
cabinet.
Wheel
(1 of 2)
6. Lift front side of cabinet and place 4x4 wood
blocks under cabinet, as shown in
Figure 15.
Figure 15. 4x4 block placement beneath cabinet.
Place 4x4
Blocks Here
4x4 Blocks
Access
Panel
Access
Panel
7. Attach caster wheel to foot pedal assembly
using pre-installed hex bolt, lock washers,
lock nut, and wheel sleeve (see
Figure 16).
Figure 16. Attaching caster wheel to foot pedal
assembly.
8. Install (2) adjustable feet into threaded holes
inside each corner of cabinet.
Figure 17. Adjustable foot installed.
Wood Block
9. With help from an assistant, remove 4x4
blocks and set machine on the ground.
x 2
Summary of Contents for G0809
Page 72: ......
