Grizzly G0791, Owner'S Manual

Page: 49 / 132

Model G0791 (Mfd. Since 9/15)
-47-
Follow Rest
Figure 56 .
Follow rest attachment.
Cap
Screws
Finger
Rollers
The carriage, cross slide, and compound rest
have locks (see
Figure 57) that can be tightened
to provide additional rigidity during operation.
Tools Needed Qty
Hex Wrench 3mm .............................................. 1
Hex Wrench 6mm .............................................. 1
Carriage & Slide
Locks
Figure 57. Locations of compound rest, carriage,
and cross slide locks.
Carriage
Lock
Compound Rest
Lock
Cross Slide
Lock
The compound rest is used to move the tool
toward and away from the workpiece at the preset
angle of the compound rest. The base of the com-
pound rest has graduated scale used for setting
the cutting tool to a specific angle.
Graduated Dial
Increments ................................. 0.001" (0.05mm)
One Full Revolution ........................0.200" (5mm)
Tool Needed Qty
Wrench 14mm ................................................... 1
To set compound rest at a certain angle:
1. Loosen two hex nuts at base of compound
rest (see Figure 58).
Compound Rest
Figure 58. Location of angle scale and rotation
hex nuts on the compound rest.
Hex Nuts
Angle
Scale
Tip: To reduce the effects of friction, lubricate the
finger rollers with way oil before operation.