-6-
Model G0782 (Mfd. Since 10/15)
End Gears
Safety Foot Brake
This lathe is equipped with a foot brake (see
Figure 6) to quickly stop the spindle instead of
allowing the spindle to coast to a stop on its own.
Pushing the foot brake while the spindle is
ON
cuts power to the motor and stops the spindle.
After the foot brake is used, the spindle lever must
be returned to the OFF (middle) position to reset
the spindle switches before re-starting spindle
rotation.
Figure 6. Foot brake and spindle lever.
Foot Brake
Spindle Lever
Configuring the end gears (shown in
Figure 5)
controls the speed of the leadscrew for threading,
or the feed rod for power feed operations.
Figure 5. End gear components.
End
Gears
Summary of Contents for G0782
Page 116: ......