Model G0782 (Mfd. Since 10/15)
-17-
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Mounted Inventory Components
Qty
A. Three-Jaw Chuck 6" ................................... 1
B. Steady Rest ................................................ 1
C. Follow Rest ................................................. 1
D. Tool Post ..................................................... 1
E. Change Gears 32T, 85T, 100T .............1 Ea.
Loose Inventory Components
Qty
F. Faceplate w/Driveplate ............................... 1
G. Four-Jaw Chuck Kit .................................... 1
H. Toolbox ....................................................... 1
Toolbox Inventory Components
Qty
I. Camlock Key 10mm ................................... 1
J. Drill Chuck Arbor MT#3/B16 ....................... 1
K. Drill Chuck B16 1.5–13mm ......................... 1
L. Tool Post T-Wrench .................................... 1
M. Hex Wrenches 2.5, 3, 4, 5, 6, 8mm .....1 Ea.
N. Change Gears 35T, 42T, 44T,
46T, 48T, 52T, 55T, 120/127T ...............1 Ea.
O. Bottle for Oil ............................................... 1
P. Live Center MT#3 ....................................... 1
Q. Dead Center MT#3 HSS Tip ...................... 1
R. Dead Center MT#3 Carbide Tip ................. 1
S. Spindle Sleeve MT#5 x MT#3 .................... 1
T. Open-End Wrenches
9/11, 10/12, 12/14, 17/19mm ..................1 Ea.
U. Flat Head Screwdriver 3" ............................ 1
V. Phillips Screwdriver 3" ................................ 1
W. Handwheel Handles ................................... 2
Figure 9. Loose inventory components.
Figure 8. Mounted inventory components.
A
B
C
D
Figure 10. Toolbox inventory.
G
H
F
L
J
V
W
T
U
S
R
Q
P
O
N
M
K
I
E
Summary of Contents for G0782
Page 116: ......
