-110-
Model G0782 (Mfd. Since 10/15)
G0782 Machine Labels C
(12/10/14)
G0782
grizzly.com
GRIZ
ZLY LOGO RED
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL!
artwork changes are required, contact us immediately at
165 X 29MM
224 X 37MM
G0782 Machine Labels C
(12/10/14)
• Label is actual size
• Label must be made of
oil-resistant material
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT
.
CHECK OIL
LEVELS BEFORE USING!
G0782
grizzly.com
COLOR CODES
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
GRIZZLY BEIGE
PANTONE 7527 C
NOTICE
PANTONE 3005 C or RAL 5005
Only trained personnel
should operate this machine.
If safe operation procedures
are not clearly understood,
get additional training before
using.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at
.
165 X 29MM
224 X 37MM
102 X 102MM
death!
Remove chuck key
and all adjustment
tools before
starting lathe.
G0782 Machine Labels B
(12/10/14)
• Label is actual size
• Label must be made of
oil-resistant material
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
73 X 154MM
Avoid setting spindle
speed too fast for
chuck RPM rating or
workpiece size/shape.
This can cause
rotating parts to fly
loose and strike
operator with great
force, resulting in
serious injury or
IMPACT INJURY
HAZARD!
WARNING!
IMPACT INJURY
HAZARD!
38 X 124MM
19 X 17MM
Fluid Capacities
Headstock
4.2 qt.
2.1 qt.
1.0 qt.
Gearbox
Apron
Grizzly #T23963 or ISO 32 Equivalent
Grizzly #T23962 or ISO 68 Equivalent
Component
Type
Capacity
Grizzly #T23962 or ISO 68 Equivalent
10.0 qt.
Coolant
Specific to Operation and Material
98 X 34MM
G0782 Machine Labels A
• Label is actual size
• Label must be made of
oil-resistant material
MODEL G0782
13" X 40" GEARHEAD FLOOR LATHE
Specifications
To reduce the risk of serious personal injury while using this machine:
1. Read and understand owner’s manual before starting.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Avoid getting entangled in rotating parts—tie back long hair, roll up
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Rotate workpiece by hand to ensure clearance before starting.
7. Test each new workpiece setup for safe rotation; start with slowest
speed and stand to side of lathe until safe rotation verified.
8. Keep all guards and covers in place during operation.
9. Make sure lathe is properly set up before starting.
10. Change coolant regularly and avoid contact with skin.
11. Never leave chuck key in chuck.
12. Never touch rotating chuck or workpiece with hands.
13. DO NOT reverse spindle rotation while spindle is moving.
14. Never leave lathe running unattended.
15. Properly support long workpieces with an appropriate rest.
16. DO NOT operate when tired or under influence of drugs or alcohol.
17. DO NOT expose to rain or use in wet locations.
18. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Motor: 2 HP, 220V, 1-Ph, 60 Hz
Full-Load Current: 10A
Swing Over Bed: 13"
Swing Over Gap: 18-3/4"
Swing Over Cross Slide: 7-3/4"
Distance Between Centers: 40"
Spindle Type: D1-4 Camlock
Spindle Taper: MT#5
Spindle Bore: 1.57" (40mm)
Tailstock Taper: MT#3
Cross Slide Travel: 6-1/8"
Compound Travel: 2-7/8"
Weight: 1320 lbs.
Manufactured for Grizzly in China
Date
Serial #
WARNING!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
COLOR CODES
PANTONE 711C or RAL 3020
GRIZZLY LOGO RED
PANTONE 151 C or RAL 2005
WARNING
164 X 112MM
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
38 X 63MM
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
38 X 63MM
PINCH
ENT
ANGLEMENT
HAZARD!
Disconnect power
before opening door
.
Stay clear of rotating
outboard spindle.
72 X 38MM
G0782 Machine Labels C
• Label is actual size
• Label must be made of
oil-resistant material
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
G0
7
8
2
COLOR CODES
PANTONE 711C or RAL 3020
PANTONE 7527 C
PANTONE 3005 C or RAL 5005
Only trained personnel
should operate this machine.
If safe operation procedures
are not clearly understood,
get additional training before
using.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
78 X 51MM
102 X 102MM
G0782 Machine Labels B
(12/10/14)
• Label is actual size
• Label must be made of
oil-resistant material
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
73 X 154MM
Avoid setting spindle
speed too fast for
chuck RPM rating or
workpiece size/shape.
This can cause
rotating parts to fly
loose and strike
operator with great
force, resulting in
serious injury or
death!
IMPACT INJURY
HAZARD!
WARNING!
IMPACT INJURY
HAZARD!
Remove chuck key
and all adjustment
tools before
starting lathe.
38 X 124MM
19 X 17MM
Fluid Capacities
Headstock
4.2 qt.
2.1 qt.
1.0 qt.
Gearbox
Apron
Grizzly #T23963 or ISO 32 Equivalent
Grizzly #T23962 or ISO 68 Equivalent
Component
Type
Capacity
Grizzly #T23962 or ISO 68 Equivalent
10.0 qt.
Coolant
Specific to Operation and Material
98 X 34MM
G0782 Machine Labels C
(12/10/14)
• Label is actual size
• Label must be made of
oil-resistant material
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
G
07
8
2
COLOR CODES
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
GRIZZLY BEIGE
PANTONE 7527 C
NOTICE
PANTONE 3005 C or RAL 5005
Only trained personnel
should operate this machine.
If safe operation procedures
are not clearly understood,
get additional training before
using.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
78 X 51MM
102 X 102MM
G0782 Machine Labels A
(12/10/14)
• Label is actual size
• Label must be made of
oil-resistant material
MODEL G0782
13" X 40" GEARHEAD FLOOR LATHE
Specifications
To reduce the risk of serious personal injury while using this machine:
1. Read and understand owner’s manual before starting.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Avoid getting entangled in rotating parts—tie back long hair, roll up
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Rotate workpiece by hand to ensure clearance before starting.
7. Test each new workpiece setup for safe rotation; start with slowest
speed and stand to side of lathe until safe rotation verified.
8. Keep all guards and covers in place during operation.
9. Make sure lathe is properly set up before starting.
10. Change coolant regularly and avoid contact with skin.
11. Never leave chuck key in chuck.
12. Never touch rotating chuck or workpiece with hands.
13. DO NOT reverse spindle rotation while spindle is moving.
14. Never leave lathe running unattended.
15. Properly support long workpieces with an appropriate rest.
16. DO NOT operate when tired or under influence of drugs or alcohol.
17. DO NOT expose to rain or use in wet locations.
18. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Motor: 2 HP, 220V, 1-Ph, 60 Hz
Full-Load Current: 10A
Swing Over Bed: 13"
Swing Over Gap: 18-3/4"
Swing Over Cross Slide: 7-3/4"
Distance Between Centers: 40"
Spindle Type: D1-4 Camlock
Spindle Taper: MT#5
Spindle Bore: 1.57" (40mm)
Tailstock Taper: MT#3
Cross Slide Travel: 6-1/8"
Compound Travel: 2-7/8"
Weight: 1320 lbs.
Manufactured for Grizzly in China
Date
Serial #
WARNING!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
COLOR CODES
PANTONE 711C or RAL 3020
GRIZZLY LOGO RED
PANTONE 151 C or RAL 2005
WARNING
164 X 112MM
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
38 X 63MM
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
38 X 63MM
PINCH
ENT
ANGLEMENT
HAZARD!
Disconnect power
before opening door
.
Stay clear of rotating
outboard spindle.
72 X 38MM
G0782 Machine Labels A
(12/10/14)
• Label is actual size
• Label must be made of
oil-resistant material
MODEL G0782
13" X 40" GEARHEAD FLOOR LATHE
Specifications
To reduce the risk of serious personal injury while using this machine:
1. Read and understand owner’s manual before starting.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Avoid getting entangled in rotating parts—tie back long hair, roll up
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Rotate workpiece by hand to ensure clearance before starting.
7. Test each new workpiece setup for safe rotation; start with slowest
speed and stand to side of lathe until safe rotation verified.
8. Keep all guards and covers in place during operation.
9. Make sure lathe is properly set up before starting.
10. Change coolant regularly and avoid contact with skin.
11. Never leave chuck key in chuck.
12. Never touch rotating chuck or workpiece with hands.
13. DO NOT reverse spindle rotation while spindle is moving.
14. Never leave lathe running unattended.
15. Properly support long workpieces with an appropriate rest.
16. DO NOT operate when tired or under influence of drugs or alcohol.
17. DO NOT expose to rain or use in wet locations.
18. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Motor: 2 HP, 220V, 1-Ph, 60 Hz
Full-Load Current: 10A
Swing Over Bed: 13"
Swing Over Gap: 18-3/4"
Swing Over Cross Slide: 7-3/4"
Distance Between Centers: 40"
Spindle Type: D1-4 Camlock
Spindle Taper: MT#5
Spindle Bore: 1.57" (40mm)
Tailstock Taper: MT#3
Cross Slide Travel: 6-1/8"
Compound Travel: 2-7/8"
Weight: 1320 lbs.
Manufactured for Grizzly in China
Date
Serial #
WARNING!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
COLOR CODES
PANTONE 711C or RAL 3020
GRIZZLY LOGO RED
PANTONE 151 C or RAL 2005
WARNING
164 X 112MM
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
38 X 63MM
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
38 X 63MM
PINCH
ENT
ANGLEMENT
HAZARD!
Disconnect power
before opening door
.
Stay clear of rotating
outboard spindle.
72 X 38MM
G0782 Machine Labels B
(12/10/14)
• Label is actual size
• Label must be made of
oil-resistant material
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
73 X 154MM
Avoid setting spindle
speed too fast for
chuck RPM rating or
workpiece size/shape.
This can cause
rotating parts to fly
loose and strike
operator with great
force, resulting in
serious injury or
death!
IMPACT INJURY
HAZARD!
WARNING!
IMPACT INJURY
HAZARD!
Remove chuck key
and all adjustment
tools before
starting lathe.
38 X 124MM
19 X 17MM
Fluid Capacities
Headstock
4.2 qt.
2.1 qt.
1.0 qt.
Gearbox
Apron
Grizzly #T23963 or ISO 32 Equivalent
Grizzly #T23962 or ISO 68 Equivalent
Component
Type
Capacity
Grizzly #T23962 or ISO 68 Equivalent
10.0 qt.
Coolant
Specific to Operation and Material
98 X 34MM
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
73 X 154MM
rotating parts to fly
loose and strike
operator with great
force, resulting in
serious injury or
death!
WARNING!
IMPACT INJURY
HAZARD!
Remove chuck key
and all adjustment
tools before
starting lathe.
38 X 124MM
Fluid Capacities
Headstock
4.2 qt.
2.1 qt.
1.0 qt.
Gearbox
Apron
Grizzly #T23963 or ISO 32 Equivalent
Grizzly #T23962 or ISO 68 Equivalent
Component
Type
Capacity
Grizzly #T23962 or ISO 68 Equivalent
10.0 qt.
Coolant
Specific to Operation and Material
98 X 34MM
G0782 Machine Labels B
(12/10/14)
• Label is actual size
• Label must be made of
oil-resistant material
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
73 X 154MM
Avoid setting spindle
speed too fast for
chuck RPM rating or
workpiece size/shape.
This can cause
rotating parts to fly
loose and strike
operator with great
force, resulting in
serious injury or
death!
IMPACT INJURY
HAZARD!
WARNING!
IMPACT INJURY
HAZARD!
Remove chuck key
and all adjustment
tools before
starting lathe.
38 X 124MM
19 X 17MM
Fluid Capacities
Headstock
4.2 qt.
2.1 qt.
1.0 qt.
Gearbox
Apron
Grizzly #T23963 or ISO 32 Equivalent
Grizzly #T23962 or ISO 68 Equivalent
Component
Type
Capacity
Grizzly #T23962 or ISO 68 Equivalent
10.0 qt.
Coolant
Specific to Operation and Material
98 X 34MM
G0782 Machine Labels A
(12/10/14)
• Label is actual size
• Label must be made of
oil-resistant material
2
87
0
G
L
E
D
O
M
"0
4
X
"3
1
E
H
T
A
L
R
O
O
L
F
D
A
E
H
R
A
E
G
Specifications
To reduce the risk of serious personal injury while using this machine:
1.
Read and understand owner’s manual before starting.
2.
Always wear approved safety glasses AND a face shield.
3.
Only plug power cord into a grounded outlet.
4.
Disconnect power before setting up, adjusting, or servicing.
5.
Avoid getting entangled in rotating parts—tie back long hair, roll up
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6.
Rotate workpiece by hand to ensure clearance before starting.
7.
Test each new workpiece setup for safe rotation; start with slowest
speed and stand to side of lathe until safe rotation verified.
8.
Keep all guards and covers in place during operation.
9.
Make sure lathe is properly set up before starting.
10.
Change coolant regularly and avoid contact with skin.
11.
Never leave chuck key in chuck.
12.
Never touch rotating chuck or workpiece with hands.
13.
DO NOT reverse spindle rotation while spindle is moving.
14.
Never leave lathe running unattended.
15.
Properly support long workpieces with an appropriate rest.
16.
DO NOT operate when tired or under influence of drugs or alcohol.
17.
DO NOT expose to rain or use in wet locations.
18.
Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Motor: 2 HP, 220V, 1-Ph, 60 Hz
Full-Load Current: 10A
Swing Over Bed: 13"
Swing Over Gap: 18-3/4"
Swing Over Cross Slide: 7-3/4"
Distance Between Centers: 40"
Spindle Type: D1-4 Camlock
Spindle Taper: MT#5
Spindle Bore: 1.57" (40mm)
Tailstock Taper: MT#3
Cross Slide Travel: 6-1/8"
Compound Travel: 2-7/8"
Weight: 1320 lbs.
a
ni
h
C
ni
yl
zzi
r
G r
of
de
r
ut
ca
f
u
na
M
Date
Serial #
W
ARNING!
COLOR CODES
164 X 112MM
W
ARNING!
BIOLOGICAL
AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
38 X 63MM
K
C
O
H
S/
Y
R
UJ
NI
!
D
R
A
Z
A
H
r
e
w
o
p t
ce
n
n
oc
si
D
,
st
ne
mt
s
uj
da
er
of
e
b
r
o ,
ec
na
ne
t
ni
a
m
.e
ci
vr
es
38 X 63MM
PINCH
ENTANGLEMENT
HAZARD!
Disconnect power
before opening door.
Stay clear of rotating
outboard spindle.
72 X 38MM
G0782 Machine Labels B
(12/10/14)
• Label is actual size
• Label must be made of
oil-resistant material
COLOR CODES
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
73 X 154MM
Avoid setting spindle
speed too fast for
chuck RPM rating or
workpiece size/shape.
This can cause
rotating parts to fly
loose and strike
operator with great
force, resulting in
serious injury or
death!
IMPACT INJURY
HAZARD!
WARNING!
IMPACT INJURY
HAZARD!
Remove chuck key
and all adjustment
tools before
starting lathe.
38 X 124MM
19 X 17MM
Fluid Capacities
Headstock
4.2 qt.
2.1 qt.
1.0 qt.
Gearbox
Apron
Grizzly #T23963 or ISO 32 Equivalent
Grizzly #T23962 or ISO 68 Equivalent
Component
Type
Capacity
Grizzly #T23962 or ISO 68 Equivalent
10.0 qt.
Coolant
Specific to Operation and Material
98 X 34MM
G0782 Machine Labels A
(12/10/14)
MODEL G0782
13" X 40" GEARHEAD FLOOR LATHE
Specifications
To reduce the risk of serious personal injury while using this machine:
1. Read and understand owner’s manual before starting.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Avoid getting entangled in rotating parts—tie back long hair, roll up
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Rotate workpiece by hand to ensure clearance before starting.
7. Test each new workpiece setup for safe rotation; start with slowest
speed and stand to side of lathe until safe rotation verified.
8. Keep all guards and covers in place during operation.
9. Make sure lathe is properly set up before starting.
10. Change coolant regularly and avoid contact with skin.
11. Never leave chuck key in chuck.
12. Never touch rotating chuck or workpiece with hands.
13. DO NOT reverse spindle rotation while spindle is moving.
14. Never leave lathe running unattended.
15. Properly support long workpieces with an appropriate rest.
16. DO NOT operate when tired or under influence of drugs or alcohol.
17. DO NOT expose to rain or use in wet locations.
18. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Motor: 2 HP, 220V, 1-Ph, 60 Hz
Full-Load Current: 10A
Swing Over Bed: 13"
Swing Over Gap: 18-3/4"
Swing Over Cross Slide: 7-3/4"
Distance Between Centers: 40"
Spindle Type: D1-4 Camlock
Spindle Taper: MT#5
Spindle Bore: 1.57" (40mm)
Tailstock Taper: MT#3
Cross Slide Travel: 6-1/8"
Compound Travel: 2-7/8"
Weight: 1320 lbs.
Manufactured for Grizzly in China
Date
Serial #
WARNING!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at
COLOR CODES
PANTONE 711C or RAL 3020
GRIZZLY LOGO RED
PANTONE 151 C or RAL 2005
WARNING
164 X 112MM
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
38 X 63MM
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
38 X 63MM
G0782 Machine Labels A
(12/10/14)
• Label is actual size
• Label must be made of
oil-resistant material
MODEL G0782
13" X 40" GEARHEAD FLOOR LATHE
Specifications
To reduce the risk of serious personal injury while using this machine:
1. Read and understand owner’s manual before starting.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Avoid getting entangled in rotating parts—tie back long hair, roll up
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Rotate workpiece by hand to ensure clearance before starting.
7. Test each new workpiece setup for safe rotation; start with slowest
speed and stand to side of lathe until safe rotation verified.
8. Keep all guards and covers in place during operation.
9. Make sure lathe is properly set up before starting.
10. Change coolant regularly and avoid contact with skin.
11. Never leave chuck key in chuck.
12. Never touch rotating chuck or workpiece with hands.
13. DO NOT reverse spindle rotation while spindle is moving.
14. Never leave lathe running unattended.
15. Properly support long workpieces with an appropriate rest.
16. DO NOT operate when tired or under influence of drugs or alcohol.
17. DO NOT expose to rain or use in wet locations.
18. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Motor: 2 HP, 220V, 1-Ph, 60 Hz
Full-Load Current: 10A
Swing Over Bed: 13"
Swing Over Gap: 18-3/4"
Swing Over Cross Slide: 7-3/4"
Distance Between Centers: 40"
Spindle Type: D1-4 Camlock
Spindle Taper: MT#5
Spindle Bore: 1.57" (40mm)
Tailstock Taper: MT#3
Cross Slide Travel: 6-1/8"
Compound Travel: 2-7/8"
Weight: 1320 lbs.
Manufactured for Grizzly in China
Date
Serial #
WARNING!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at [email protected].
COLOR CODES
PANTONE 711C or RAL 3020
GRIZZLY LOGO RED
PANTONE 151 C or RAL 2005
WARNING
164 X 112MM
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
38 X 63MM
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
38 X 63MM
PINCH
ENT
ANGLEMENT
HAZARD!
Disconnect power
before opening door
.
Stay clear of rotating
outboard spindle.
72 X 38MM
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1113
1112
1104
1114
1104
1106
1106
1115
Labels & Cosmetics
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1101 P07821101 STOP OIL FILL TAG
1109 P07821109 GRIZZLY NAMEPLATE
1102 P07821102 MACHINE ID LABEL
1110 P07821110 TRAINED PERSONNEL NOTICE
1103 P07821103 IMPACT INJURY HAZARD LABEL
1111 P07821111 WARNING/HAZARD LABEL
1104 P07821104 ELECTRICITY LABEL
1112 P07821112 GRIZZLY BEIGE TOUCH-UP PAINT
1105 P07821105 BIOLOGICAL/POISON HAZARD LABEL
1113 P07821113 FLUID CAPACITY LABEL
1106 P07821106 DISCONNECT POWER LABEL
1114 P07821114 PINCH/ENTANGLEMENT HAZARD LABEL
1107 P07821107 MODEL NUMBER LABEL
1115 P07821115 GRIZZLY GREEN TOUCH-UP PAINT
1108 P07821108 GRIZZLY.COM LABEL
Summary of Contents for G0782
Page 116: ......
