manualshive.com logo in svg

Grizzly G0750GV, Owner'S Manual

Introducing the formidable Grizzly G0750GV, a powerful machine built for high-precision metal cutting. Ensure optimal performance and safety with the indispensable Owner's Manual. Download this manual for free at manualshive.com, unlocking a wealth of knowledge and maximizing your experience with this exceptional product.

Share
Download
background image

-8-

Model G0750GV (Mfd. Since 03/18)

The information contained herein is deemed accurate as of 10/1/2018 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 3 OF 3

Model G0750GV

Construction

Base..................................................................................................................................................... Cast Iron

Headstock............................................................................................................................................ Cast Iron

End Gears...................................................................................................................... Flame-Hardened Steel

Bed........................................................................................ Induction-Hardened, Precision-Ground Cast Iron

Body..................................................................................................................................................... Cast Iron

Stand............................................................................................................................................. Formed Steel

Paint Type/Finish...................................................................................................................................... Epoxy

Fluid Capacities

Headstock Capacity.................................................................................................................................. 3.5 qt.

Headstock Fluid Type........................................................... ISO 32 Oil (eg. Grizzly T23963, Mobil DTE Light)

Gearbox Capacity........................................................................................................................................ 1 qt.

Gearbox Fluid Type................................................................. ISO 68 Oil (eg. Grizzly T23962, Mobil Vactra 2)

Apron Capacity......................................................................................................................................... 0.5 qt.

Apron Fluid Type..................................................................... ISO 68 Oil (eg. Grizzly T23962, Mobil Vactra 2)

Other Specifications:

Country of Origin ................................................................................................................................................ China

Warranty ........................................................................................................................................................... 1 Year

Approximate Assembly & Setup Time ............................................................................................................. 2 Hours

Serial Number Location ........................................................................................................... ID Label on Headstock

Sound Rating ..................................................................................................................................................... 83 dB

ISO 9001 Factory .................................................................................................................................................. Yes

Certified by a Nationally Recognized Testing Laboratory (NRTL) .......................................................................... No

Features:

1/2 in. Tailstock Square-Drive Lock-Down to use with Torque Wrench for Precise Positioning

23 in. Minimum Gun Barrel Length Through Spindle w/4-Jaw Chuck (Allows for Barrel to Stick Out for Threading)

2-Axis Digital Readout

Electronic Variable-Speed Spindle w/Digital Tachometer

Removable Bed Gap

Quick-Change Gearbox Controls

On/Off/Reverse Spindle Switch on Carriage

LED Work Light

Steady and Follow Rests with Roller Bearing Supports

Feed Rod Clutch

Outboard Spindle Support Spider

Cast-Iron Stand with Extended Base

Cast-Aluminum End-Gear Cover

Accessories Included:

6 in. 3-Jaw Chuck with 2-Piece Reversible Jaws

8 in. 4-Jaw Chuck with Reversible Jaws

10 in. Faceplate

MT#3 Live Center

(2) MT#3 Dead Centers (1 Carbide-Tipped)

Quick-Change Tool Post with 1 Tool Holder

Set of 6 Change Gears

Toolbox

Accessories Recommended:

T26300 Taper Attachment for G0750G

Summary of Contents for G0750GV





















































































































Reviews:

No comments

Related manuals for G0750GV

Wood-mizer BMT100 Safety, Operation, Maintenance & Parts Manual preview
BMT100
Brand: Wood-mizer Pages: 23
Pragati BTP-50 Instruction Manual preview
BTP-50
Brand: Pragati Pages: 32
Wen 34018 Replacement Manual preview
34018
Brand: Wen Pages: 3
Acer ATL 1820E Operation Manual preview
ATL 1820E
Brand: Acer Pages: 76
Oliver 2018 Owner'S Manual preview
2018
Brand: Oliver Pages: 30
Femi JOB LINE DIGITO ML 350 User Manual preview
JOB LINE DIGITO ML 350
Brand: Femi Pages: 60
Proxxon PD 230E Manual preview
PD 230E
Brand: Proxxon Pages: 117

Brands by name

Popular brands

Load more brands