-16-
Model G0725 (Mfd. Since 02/20)
3. Attach the fence sliding handle to the lock-
ing plate assembly. Secure the locking plate
in position by tightening the fence sliding
handle, as shown in
Figure 13.
Figure 13. Securing the locking plate assembly
with the fence sliding handle.
Fence Sliding
Handle
Locking Plate
Assembly
4. Press down on limit plate tab on fence
assembly, and insert limit block with notched
side facing upward (see
Figure 14).
5. Use (2) M6-1 x 20 cap screws and (2) 6mm
lock washers to attach fence to fence bracket
assembly (see
Figure 14).
Figure 14. Attaching fence to fence bracket
assembly.
Cap Screws
Limit
Plate
Tab
Limit Block
Bracket
Assembly
Fence
Plate
x 2
6. Slide the fence bracket assembly onto the
support dovetails, as shown in
Figure 15.
8. Slide the fence forward until it contacts the
cutterhead guard. The guard should com-
pletely cover the cutterhead, as shown in
Figure 17.
7. Install the fence tilting handle by threading
the handle shaft into the bracket assembly,
as shown in
Figure 16.
Figure 17. Fence positioned over the jointer
tables.
Jointer
Tables
Fence
Cutterhead
Guard
Figure 15. Fence bracket assembly positioned
over dovetails.
Support
Dovetails
Fence Bracket
Assembly
Locking
Plate
Assembly
Figure 16. Installing the fence tilting handle.
Fence Tilting
Handle Shaft
Bracket
Assembly
Fence Tilting
Handle
Summary of Contents for G0725
Page 44: ......
