Grizzly G0636X, Owner'S Manual, Page: 54 / 68

-52-
Model G0636X (Mfd. Since 09/18)
9. Figure 66 shows positions of wheels when
coplanar. When wheels are coplanar, re-
install table, table insert and pin, re-adjust
guide blocks and rear support bearings, and
close wheel covers.
10. Finally, check table and fence alignment (see
Pages 28 & 29).
Coplanar
Parallel, Not
Coplanar
Not Parallel
Not Coplanar
Adjust
Tracking Knob
Coplanarity
Gauge
Contacts Top
And Bottom of
Both Wheels
Coplanarity Gauge
Shim Upper
Wheel Out
Adjust
Lower
Hub
Figure 66. Coplanarity diagram.
Note: The blade may track slightly off-center
when the wheels are coplanar. This is natural
because the blade will be balanced on the crown
of the tire, rather than just in the center of the tire.
This will be more noticeable with larger blades.