Grizzly G0636X, Owner'S Manual, Page: 22 / 68

-20-
Model G0636X (Mfd. Since 09/18)
6. Loosen lock lever (see Figure 14) so blade
tracking knob can rotate.
NOTICE
Changes in the blade tension may change
the blade tracking.
7. Spin upper wheel with one hand and rotate
blade tracking knob with other hand to make
blade ride in center of bandsaw wheel tire.
8. Tighten lock lever and close upper wheel
cover.
For the best performance from your saw, regularly
maintain proper tracking of the blade.
Positive Stop
Personal injury or death
can occur if bandsaw
starts during table adjust-
ments. Disconnect power
from bandsaw before per-
forming table adjustments.
The positive stop allows the table to be quickly
and accurately returned to the horizontal (0˚) posi-
tion after being adjusted to a different angle.
To set the positive stop:
1. DISCONNECT MACHINE FROM POWER!
2. Adjust blade tension to appropriate level for
blade size on blade tension scale (see Page
24).
3. Loosen jam nut that locks positive stop bolt in
place.
Figure 15. Positive stop bolt and jam nut (as
viewed from front).
Jam Nut
Stop
Bolt
Figure 14. Blade tracking controls.
Lock
Lever
Blade Tracking Knob
Quick Tension Lever