Model G0636X (Mfd. Since 09/18)
-25-
Note: The
1
/
16
" spacing is ideal, although with
larger blades it may not be possible. In such
cases, adjust the guide bearings as far for-
ward to the blade gullets as possible, and still
maintain the proper support bearing spacing
adjustment.
Blade
Guide
Bearing
Blade
Gullets
Approximately
0.016"
Figure 24. Lateral adjustment of blade guides.
5. Tighten lateral adjustment rod cap screw.
6. Loosen bearing rotation adjustment bolts on
both sides of blade.
7. Rotate knurled knobs to position bearings
0.004" away from blade.
Note: 0.004" is approximately the thickness
of a dollar bill.
8. Tighten both bearing rotation adjustment
bolts to lock blade guide bearings in position.
Figure 23. Upper blade guide controls (front
view).
Support Bearing
Adjustment Shaft Bolt
Bearing
Rotation
Adjustment
Bolt
3. Familiarize yourself with blade guide controls
shown in
Figures 22 & 23.
4. Loosen lateral adjustment rod cap screw,
loosen support bearing adjustment shaft bolt,
and adjust blade guides until edges of bear-
ings are
1
/
16
" behind blade gullets, as illus-
trated in
Figure 24.
Make sure that the blade teeth will not con-
tact the guide bearings when the blade is
against the rear support bearing during the
cut or the blade teeth will be ruined.
Figure 22. Upper blade guide controls (rear
view).
Blade Guide
Bearings
Bearing Rotation
Adjustment Bolt
Lateral
Adjustment Rod
Cap Screw
Knurled
Knob
Guide Block Assembly
Cap Screws
Summary of Contents for G0636X
Page 15: ...Model G0636X Mfd Since 09 18 13 5mm Hardware Recognition Chart...
Page 68: ......