Grizzly G0636X, Owner'S Manual, Page: 16 / 68

-14-
Model G0636X (Mfd. Since 09/18)
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Crate Contents (Figure 4) Qty
A. Bandsaw (not shown) ................................. 1
B. Cast Iron Fence Assembly ......................... 1
C. Resaw Fence ............................................. 1
D. Guide Post Handwheel............................... 1
E. Miter Gauge ................................................ 1
Figure 4. Loose inventory components.
B
C
D
E
Hardware and Tools (Not Shown) Qty
• Eye Bolts M10-1.5 x 15 ............................... 2
• Handle M8-1.25 x 45 (Resaw Fence) ......... 1
• Flat Washer 8mm (Resaw Fence) .............. 1
• Moving Plate (Resaw Fence) ..................... 1
• Open-End Wrench 10 x 13mm ................... 1
• Open-End Wrench 17 x 19mm ................... 1
• Hex Wrenches 5, 6mm ..........................1 Ea