Grizzly G0623X, Owner'S Manual, Page: 49 / 80

G0623X/G0623X3 10" Sliding Table Saw
-47-
SECTION 6: MAINTENANCE
Cleaning the Model G0623X/G0623X3 is relative-
ly easy. Vacuum excess wood chips and sawdust
from the table saw and inside the cabinet. Wipe
off the remaining dust with a dry cloth.
Use compressed air (make sure to wear safety
glasses and a respirator when doing this) to blow
dust from between the two sections of the sliding
table. If any resin has built up, use a resin dissolv-
ing cleaner to remove it. Treat all unpainted cast
iron and steel with a non-staining lubricant after
cleaning.
Cleaning
Protect the unpainted cast iron surfaces on the
table by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces. DO NOT clean
cast iron with water or it will rust!
Keep tables rust-free with regular applications of
products like G96
®
Gun Treatment, SLIPIT
®
, or
Boeshield
®
T-9 (see
Page 46
for more details).
Unpainted Cast Iron
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
• Loose mounting bolts.
• Worn or damaged saw blades.
• Worn or damaged switches or wires.
• Any other unsafe condition.
Weekly Maintenance:
• Clean sliding table surface and grooves.
• Clean the cast iron saw table.
• Clean the sliding table roller guideways.
• Clean the rip fence and sliding grooves.
• Clean the rip fence bracket.
Monthly Check:
• Clean/vacuum dust buildup from inside cabi-
net and off motor.
• V-belt tension, damage, or wear.
Note:
To ensure optimum power transmission
from the motor to the blades, the V-belts must be
in good condition (free from cracks, fraying and
wear) and operate under proper tension.
Schedule
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.