Grizzly G0623X, Owner'S Manual, Page: 44 / 80

-42-
G0623X/G0623X3 10" Sliding Table Saw
Figure 66. Crosscutting workpieces
using the rip fence as a cut-off gauge.
Additionally, this machine has the capability of
crosscutting workpieces while using the rip fence
as a cut-off gauge (
Figure 66
).
Determine which cutting operation will be best
suited for the workpiece to be crosscut.
— If you will be crosscutting full size panels,
then skip ahead to Crosscutting Full Size
Panels
.
— If you will be crosscutting smaller panels,
then skip ahead to Crosscutting Smaller
Panels
.
— If you will be crosscutting workpieces using
the rip fence as a cut-off gauge, then skip
ahead to
Crosscutting Using Rip Fence
as a Cut-Off Gauge .
The Model G0623X/G0623X3 can crosscut full
size panels with the fence in the forward or rear
position, although it is easier to load full size pan-
els with the crosscut fence mounted in the forward
position (see
Figure 64 ).
Mounting the crosscut fence in the rear position
(
Figure 65 ) gives greater stability for crosscutting
smaller panels.
Crosscutting
Figure 64.
Crosscutting full size panel.
Forward Mounted
Crosscut Fence
Figure 65. Crosscutting smaller panels.
Rear Mounted
Crosscut Fence