Grizzly G0542, Instruction Manual

Page: 14 / 32

-12- G0542 48" Pan and Box Brake
Figure 11. Counterweight mounted to side of
bending leaf.
Components and Hardware Needed: Qty
Counterweight Assemblies .................................2
Hex Bolts M12-1.75 x 40 ....................................4
Lock Washers 12MM ..........................................4
Flat Washers 12MM ...........................................4
Tools Needed:
18MM Wrench or Socket ....................................1
To install the counterweights:
1.
Have an assistant hold one of the counter-
weights up to the side of the brake and align
the mounting holes.
2.
Bolt the counterweight assembly to the side
of the bending leafs, as shown in Figure 11 ,
with two hex bolts, lock washers, and flat
washers.
3. Repeat steps 1 & 2 at the other side of the
brake with the remaining counterweight and
hardware.
Mounting Stop Rod
Components and Hardware Needed: Qty
Stop Rod ........................................................... 1
Hex Nut M10-1.5 ............................................... 1
Hex Nut M16-2 .................................................. 2
Stop Hub ........................................................... 1
Stop Collar ......................................................... 1
T-Bolt ................................................................. 1
Flat Washer 16MM ............................................ 1
Tools Needed:
24MM or Adjustable Wrench ............................. 2
To mount the stop rod:
1.
Insert the stop rod through the stop hub (see
Figure 12 ).
Figure 12. Stop rod components.
Stop Hub
Stop Rod
Stop Collar
Hex Nut
M10-1.5
T-Bolt
Installing
Counterweights
2.
Insert the short end of the stop rod through
the hole in the bending leaf.
3. Insert the stop hub through the hole in the
side of the brake, and use one of the M16-2
hex nuts and the 16mm washer to tighten the
stop hub.
4.
Slide the stop collar onto the end of the stop
rod, and finger tighten the M10-1.5 hex nut
onto the end of the stop rod.
5.
Thread the T-bolt into the stop collar.