Griven GRAPH-i-CELL, Instruction Manual

Page: 27 / 32

5.3 RDM operating mode
In this mode the DMX address of each Graph-i-cell must be set by the user.The DMX address cn be modified using
a DMX/RDM controller.
When operating in DMX mode, the projector can accept the following RDM commands:
• discovery
Upon request of the RDM controller, the projector adverts its own presence (the RDM controller will display the
projector between a list).
• DMX address reading and setting.
• Channels number reading and setting.
• On / Off identification
This command is used to identify the projector you want to get access to (the identification happens by swit-
ching on at full intensity all the LEDs).
• Manufacturer
The name of the manufacturer (Griven) is displayed.
• Model description
The projector model is displayed.
• Software version description
The version of the firmware in use on the projector (v.x.xx) is displayed.
• Temperature
The LEDs operating temperature value is displayed.
English 27