Griven GRAPH-i-CELL, Instruction Manual

Page: 18 / 32

1.1 Safety information
1.1.1 Protecting against electric shock
• Class 3 device. It uses operating voltages inferior to 50 Volts. It excludes ground connection.
• Disconnect the unit from mains supply before servicing it or performing any other action.
• Before connecting the unit to power supplies, verify that operating voltage and frequency are compatible.
• Disconnect the unit from mains supply before connecting fixture to fixture.
• Do not handle the unit with wet hands or in the presence of water.
• Check regularly that the power supply cable is not damaged or crushed.
• Apply to a qualified technician for any regular maintenance action not described in this manual.
1.1.2 Installation
• Fix the unit with screws, hooks or any other support able to bear the weight of the unit itself.
• If the unit is fixed onto a suspended structure, this structure is supposed to bear at least ten times the weight of
all devices to be fixed.
• The unit installation actions must be performed by a qualified staff.
1.1.3 Protection against burns and fire
• Suitable to be installed onto normally inflammable surfaces.
• Non installate l’apparecchio in locali in cui la temperatura ambiente supera i 40° (104°F).
1.1.4 Weather protection
The unit is classified as device with an IP65 weather protection rate.
1.2 Compliance
• Product in compliance with EN60598-1 EN60598-2-17.
• Product in compliance with 2002/95/CE (RoHS).
1.0 Introduction
Warning!
This unit is suitable for professional use only, not for domestic use.
III
18 English