Griven GRAPH-i-CELL, Instruction Manual

Page: 21 / 32

Plug the connectorsby screwing the ring “A” by hand.
Leaving the connectors unprotected or disconnec-
ted may cause water infiltrations and consequent product malfunctioning.
Should it not be possible to connect the units during the installation phase, please protect
their connectors with suitable caps.
The output connector of the chain last fixture must necessarily and permanently be protec-
ted by a suitable cap or end line cap, if required.
A
A
1 2
NO!
Warning!
Do not screw the connectors with pliers or other tools,
as they might damage.
Warning !
Connect the units only after disconnecting the mains!
Warning!
• Before connecting the unit, verify that power supplies features are compatible with the unit features.
• It is suggested to use a magnetothermic switch along the power supply line, as prescribed by in force rules.
• The unit must not be powered up through a dimmer power device.
• Wiring and connection actions are to be performed by a qualified staff.
English 21