Griven AL1416, Owner'S Manual

Page: 14 / 20

14
4.0 USE OF THE TRANSFORMER BOX
Once the device is connected to the mains, the red LED on in the PCB indicates that the DMX
signal is correctly received, while, if the red LED is off , it means that the DMX signal is either
absent or not correctly received.
The dip-switch n°10 set to OFF allows to control each PARADE unit indipendently (24 channels
are used).
The dip-switch n°10 set to ON allows to control all the PARADE units syncronized (4 channels
are used).
4.1 DMX cable connection
DMX IN/OUT
Use 2-pole shielded
cable + hose (GND)
The hose must not
touch the body
Hose
LED OFF