background image

6

en

For your safety.

Do not use this machine before you have thor-
oughly read and completely understood theseop-
erating instructions, including the figures, 
specifications, and safety regulations.

Please also observe the relevant national regulations on 
electrical safety and occupational safety.
Non-observance of the safety instructions in the said 
documentation can lead to an electric shock, burns 
and/or severe injuries.
This Instruction Manual should be kept for later use and 
enclosed with the power tool, should it be passed on or 
sold.

Intended use of the machine.

This machine is intended for deburring and polishing 
metal materials using the application tools and accessories 
recommended by FEIN in weather-protected environ-
ments. The machine is not approved for use with grinding 
discs.

Special safety instructions.

Wear personal protective equipment. Depending on appli-
cation, use face shield, safety goggles or safety glasses. 
Where appropriate, wear dust mask, hearing protectors, 
gloves and workshop apron capable of stopping small 
abrasive or workpiece fragments. 

The eye protection 

must be capable of stopping flying debris generated by 
various operations. The dust mask or respirator must be 
capable of filtrating particles generated by your opera-
tion. Prolonged exposure to high intensity noise may 
cause hearing loss.

While working, do not wear loose clothing, jewellery or 
open, long hair. 

Despite protective devices, loose objects 

can be snagged or caught by moving parts and lead to 
injury.

Do not use brushes, grinding and polishing tools that have 
not been specifically developed or approved by the man-
ufacturer. 

Safe operation is not ensured only because 

brushes, grinding and polishing tools fit on your machine.

The allowable speed of the brushes, grinding and polish-
ing tools must be at least equal to the maximum speed 
marked on the machine. 

Tools running faster than their 

rated speed can break apart and be thrown about.

Always use undamaged clamping discs of correct size 
and shape for the selected application tool. 

Suitable 

flanges support the application tool and thus reduce the 
danger of tool breakage.

Please observe that brushes can lose wire bristles or 
fragments during operation. Do not overstress the wires 
by applying excessive load to the brush. 

The wire bristles 

can easily penetrate light clothing and/or skin.

Do not use damaged application tools. Before each use, 
check application tools such as wire brushes for loose or 
broken wires. 

The outside diameter and the thickness of 

the application tool must be within the capacity rating of 
your machine.

Always use the protective devices attached on the 
machine. The protective devices must be securely 
mounted to the machine in order to achieve maximum 
safety. 

The protective devices are supposed to protect 

the user from grinding particles thrown from the machine 
and from accidental contact with the brushes, grinding 
and polishing tools.

Warning! Danger of fire and explosion! When grinding 
metals (e.g., aluminium or magnesium), dust develops 
that may be combustible or explosive. Do not operate the 
machine near flammable materials. 

Sparks could cause 

these materials to ignite.

Keep bystanders a safe distance away from work area. 
Anyone entering the work area must wear personal pro-
tective equipment. 

Fragments of workpiece or of a bro-

ken accessory may fly away and cause injury beyond 
immediate area of operation.

The workpiece must securely face flat on the grinding 
rest. Workpieces that are too small may not be worked. 

Danger of injury by the workpiece being thrown from 
the machine.

The surface being worked can become very hot. 

Do not 

touch it with your hands.

Never touch rotating brushes, grinding and polish-
ing tools. 

Danger of injury.

In situations of danger, immediately press the safety 
pushbutton. 

The machine runs on for approx. 50 sec-

onds. 

Clean the ventilation openings on the power tool at regu-
lar intervals using non-metal tools. 

The blower of the 

motor draws dust into the housing. An excessive accu-
mulation of metallic dust can cause an electrical hazard.

Ensure that the machine is positioned securely and hori-
zontal. 

Serious injuries can be caused if the machine tips 

over during operation.

The mains plug of the machine may be mounted only by 
a qualified electrician. 

The protective conductor in the 

mains socket outlet must be connected with the protec-
tive earthing of the mains supply.

Pull out the mains plug for maintenance and repair!  

Switching the machine on unintentionally can lead to 
serious injuries.

Have the electrical safety of the machine checked regu-
larly in accordance with statutory regulations. 

For 

machines that have not been checked, there may be dan-
ger of electrical shock!

Check the rotation direction of the motor before starting 
the operation of the machine for the first time. 

If the rota-

tion direction of the motor is incorrect, the workpiece 
can be thrown from the machine and cause an accident. 
The rotation direction may be changed only by a quali-
fiedelectrician.

The machine may not be operated with a single brush, 
grinding or polishing tool. Always mount application tools 
in pairs. 

When using a single application tool, the work 

area is not sufficiently covered off.

OBJ_BUCH-0000000329-001.book  Page 6  Thursday, September 13, 2018  5:27 PM

Summary of Contents for 7 902 07 09 57 3





















Reviews: