Grillo FD 2200 4WD, Operator'S Manual

Page: 15 / 88

FD2200 4WD / Translation of the original instructions
MAINTENANCE SUMMARY TABLE
PROCEDURE EVERY 8
HOURS
AFTER 20
HOURS
EVERY
50
HOURS
EVERY
100
HOURS
ONCE A YEAR
OR EVERY 250
HOURS
Engine oil
check the level ●
change
●
(first
change)
●
Air filter
check ●
replace ٭
Hydraulic oil
check the level ●
replace
٭
(first change after
500 hours)
Check that the cooler intake grid is clean
●
Check that blades are well-sharpened
and well-fixed
● ●
Lubricate with grease
● ●
● recommended procedure
٭
procedure to be carried out if necessary
LUBRICATION POINTS WITH GREASE
Find the lubrication points following the scheme below. Grease the rear axle pivots, the pedals, the PTO
transmission belt guide pulley, the pivot connected to 2 points joint of the cutting deck, the grass catcher lifter arms
and the turbine shaft every 50 hours.
13