GIR1002 FR / GIA1000 FR Connecting and Operating Manual Version: 4.03-3 page: 8
Display/setting of breaking point/hysteresis for switching output 1 or 2
To be called up by:
pressing button 1 till LEDs
“
SET
”
, "1" or
“
2
”
and
“
OFF/Hy
”
are illuminated.
Display:
The 7-segment display shows the breaking point/hysteresis for switching
output 1 or 2.
Setting:
Set breaking point/hysteresis by means of buttons 2 and 3. LEDs "1" or
“
2
”
and
“
ON/Hy
“
will start flashing.
Buttons 2 and 3 are equipped with a scrolling function, i.e. the making
point will be increased respectively decreased by 1 digit when button 2
respectively button 3 is pressed briefly (no more than 1 s). When pressing
these buttons for a longer time (over 1 s) the values will start
“
scrolling
”
upwards respectively downwards. After
“
scrolling
”
of approx. 150 digits the
“
scrolling speed
”
will be increased by a factor of 10.
Use button 4 to acknowledge new breaking point/hysteresis.
LEDs "1" or
“
2
”
and
“
ON/Hy
“
will stop flashing.
Switch over to display of current measuring value by pressing button 4 once again.
Display/setting of max. alarm limit
To be called up by:
pressing button 1 till LEDs
“
SET
”
,
“
ALARM
”
and
“
max.
”
are illuminated.
Display:
The 7-segment display shows the max. alarm limit.
Setting:
Set max. alarm limit by means of buttons 2 and 3.
LEDs
“
ALARM
”
and
“
max.
“
will start flashing.
Buttons 2 and 3 are equipped with a scrolling function, i.e. the making
point will be increased respectively decreased by 1 digit when button 2
respectively button 3 is pressed briefly (no more than 1 s). When pressing
these buttons for a longer time (over 1 s) the values will start
“
scrolling
”
upwards respectively downwards. After
“
scrolling
”
of approx. 150 digits the
“
scrolling speed
”
will be increased by a factor of 10.
Use button 4 to acknowledge new max. alarm limit
.
LEDs
“
ALARM
”
and
“
max.
“
will stop flashing.
Switch over to display of current measuring value by pressing button 4 once again.
Display/setting of min. alarm limit
To be called up by:
pressing button 1 till LEDs
“
SET
”
,
“
ALARM
”
and
“
min.
”
are flashing
Display:
The 7-segment display shows the min. alarm limit.
Setting:
Set min. alarm limit by means of buttons 2 and 3. LEDs
“
ALARM
”
and
“
min.
“
will start flashing.
Buttons 2 and 3 are equipped with a scrolling function, i.e. the making
point will be increased respectively decreased by 1 digit when button 2
respectively button 3 is pressed briefly (no more than 1 s). When pressing
these buttons for a longer time (over 1 s) the values will start
“
scrolling
”
upwards respectively downwards. After
“
scrolling
”
of approx. 150 digits the
“
scrolling speed
”
will be increased by a factor of 10.
Use button 4 to acknowledge new min. alarm limit.
LEDs
“
ALARM
”
and
“
min.
“
will stop flashing.
Switch over to display of current measuring value by pressing button 4 once again.
Display/setting of alarm delay [optional]
To be called up by:
Push the button at the rear of the GIR1002 till the LED "SET" is
illuminated. Pressing button 1 till LEDs
“
SET
”
,
“
ALARM
”
are illuminated.
Display:
The 7-segment display shows "d." and the alarm delay.
Setting:
Set alarm delay by means of buttons 2 and 3.
Use button 4 to acknowledge new min. alarm limit.
Switch over to display of current measuring value by pressing button 4
once again.
