GIR1002 FR / GIA1000 FR Connecting and Operating Manual Version: 4.03-3 page: 11
Fault Codes
In case of unacceptable conditions in the system a fault code will be displayed.
Fault codes have been defined as follows:
FE 1:
Measuring range has been exceeded
This fault code indicates that the measuring range has been exceeded.
Possible fault cause:
the input frequency is too high
Remedies:
FE 1 will be reset as soon as the frequency is back within its permissible range.
FE 2:
Measuring values have fallen below permissible range
This fault code indicates that the measuring values have fallen below the permissible range.
FE 3:
Display range has been exceeded
This fault code indicates that the max. display value of 9999 digits has been exceeded.
Remedies:
FE 3 will be reset as soon as the measuring values are back within
their permissible range.
FE 4:
Values on the display have fallen below permissibe range
This fault code indicates that the min. display value of -1999 digits has fallen below.
Remedies:
FE 4 will be reset as soon as the values on the display are back within their
permissible range.
Please Attention:
If fault codes are displayed or device has malfunction, please check first configutation of
GIR1002FR. Please refere to chapter "Configuration"
Additional Configuration Notes For Flow Transducers:
If a GIR1002FR is used with one of the flow transducers mentioned below, we suggest the following
settings:
configuration point 2:
choose input mode "In.11".
configuration point 3:
enter the refering decimal point position of the table shown below.
configuration point 4:
for a flow display of [l/min] the flow transducer´s value for pulses/man. has to be
entered. A selection of the values of several transducers is shown below.
flow transducer
suggested d.p. position
scale value (pulse count)
VISION 2008
--.--
1000
FFG 60 (2mm nozzle)
--.--
1000
FH-Messing (1mm nozzle)
--.--
2350
FHKK-PVDF (1mm nozzle)
--.--
2350
(3mm nozzle)
--.--
570
VZB (1mm nozzle)
--.--
1300
FMFG (8mm nozzle)
--.--
300
FHKSC (1.2mm nozzle)
-.---
1800
VTH 25 MS - 180
---.-
67
