GIR1002 FR / GIA1000 FR Connecting and Operating Manual Version: 4.03-3 page: 7
Alarm reset and deactivate tara function
To be called up by:
pressing button 4 for approx. 4s
Display:
please refer to
“
display of current measuring value
”
Display of max. value
To be called up by:
briefly pressing button 2
Display:
The 7-segment display shows the max. value
LED
“
1
”
:
gives status of relay 1
LED
“
2
”
:
gives status of relay
LED flashing: relay contact made
LED not flashing: relay contact broken
LED
“
ALARM
”
:
LED flashing in case of alarm.
LED
“
max.
”
:
LED flashing
Max. value reset
To be called up by:
pressing button 2 for approx. 4s
Display:
please refer to
“
display of max. value
”
Display of min. value
To be called up by:
briefly pressing button 3
Display:
The 7-segment display shows the min. value
LED
“
1
”
:
gives status of relay 1
LED
“
2
”
:
gives status of relay 2
LED flashing: relay contact made
LED not flashing: relay contact broken
LED
“
ALARM
”
:
LED flashing in case of alarm.
LED
“
min.
”
:
LED flashing
Min. value reset
To be called up by:
pressing button 3 for approx. 4s
Display:
please refer to
“
display of min. value
”
Display/setting of making point/switching point for switching output 1 or 2
To be called up by:
pressing button 1 till LEDs
“
SET
”
,
“
1
”
or "2" and
“
ON/SP
”
are illuminated.
Display:
The 7-segment display shows the making point/switching point for
switching output 1 or 2.
Setting:
Set making point/switching point by means of buttons 2 and 3. LEDs
“
1
”
or "2" and
“
ON/SP
“
will start flashing.
Buttons 2 and 3 are equipped with a scrolling function, i.e. the making
point will be increased respectively decreased by 1 digit when button 2
respectively button 3 is pressed briefly (no more than 1 s). When pressing
these buttons for a longer time (over 1 s) the values will start
“
scrolling
”
upwards respectively downwards. After
“
scrolling
”
of approx. 150 digits the
“
scrolling speed
”
will be increased by a factor of 10.
Use button 4 to acknowledge new making point/switching point.
LEDs
“
1
”
or "2" and
“
ON/SP" will stop flashing.
Switch over to display of current measuring value by pressing button 4
once again.
