[EN]
13
warning the user with error codes in case of failure, and facilitating troubleshooting.
INTRODUCTION OF PANEL
:
A - KEY IDENTIFICATION:
ON / OFF KEY:
Allows the system to be turned on and
off. Cancels all controls and extinguishes the displays. (It
does not close the lamp relay, it process. The key lights up
while the system is in start mode, and the led goes out
when it is does not close the real time clock indicator.)
START STOP KEY:
Used to start or stop the cooking
stopped.
STEAM KEY:
When steam parameters are provided, this
button is used to make steam. The system must be in the
start position for operation.
LAMP KEY:
Turns the lamp on and off when the system
is on or off.
REVIEW KEY:
The system does not show the program
set values set by the user and the measured temperature
values of the system when the system is in the ON
position.
OUT I / O KEY:
This key can be used in start mode. It
will be used for steam preparation.
DURATION START KEY:
The system is used to run the
schedule after it has been started.
TIME STOP KEY:
Stop the timer. Shut up the buzzer.
OK KEYS:
Used to set the data.
P1 - P8 KEYS:
Used for program selection and program
recording.
B - DISPLAY DEFINITIONS:
TOP TEMPERATURE INDICATOR:
When the oven is in
the ON position, the upper resistance does not show the
temperature values. The indicator does not work when the
oven is off. The error indication is made from this display.
BOTTOM TEMPERATURE INDICATOR:
When the oven
is in the on position, it does not show the lower resistance
temperature values. The indicator does not work when the
oven is off.
TOP SET (SHOW SET) INDICATOR:
Displays the Set
value when the oven is in the ON position.
BOTTOM SET (ALT SET) INDICATOR:
Displays the set
value when the oven is in the on position.
TIME DISPLAY:
Displays the real time clock when the
oven is off and shows the cooking time when the oven is
in the on position.
TIME SET DISPLAY:
When the oven is off, the opening
time is shown in this display. When the oven is in the on
position, the time setting value is displayed.
STEAM NOT READY LED
: When the external steam
boiler is warmed up while the oven is in the start position,
this led lights up. Steaming can not be done at this time.
STEAM READY LED:
When the oven is in the start
position, this led lights up when the external steam boiler
heats up. Steam can be given at this time.
LEDs 1 to 6:
Specifies the heating relays in the open state
in the start state and the temperature in the preview
mode.
