12
Continuity Check
Do not connect the meter to a source of voltage or current when the
selector switch is in the
position. Damage to the meter can
result.
1. Shut off and lock out the power. Make sure all capacitors are fully
discharged. Voltage must not be present.
2. Plug the black test lead in to the COM terminal. Plug the red test lead into
the V
Ω
terminal.
3. Set the selector switch to
.
4. Press
. The
and
Ω
icons will appear.
5. Connect the test leads to the circuit. The buzzer will sound if the
resistance of the circuit is less than 50
Ω
.
