IMPORTANT SAFEGUARDS
- Please read these instructions carefully before use.
- Keep present instructions for future references.
- Check that your mains voltage corresponds to that stated on the appliance.
- Never use this unit near bathtub, shower, wash-hand basins or other containers with water.
- Never use this apparatus near water projections.
- Never use this apparatus with the wet hands.
- If, unfortunately the apparatus is wet, immediately withdraw the cord of the socket-outlet.
Inform potential users of these instructions.
- Never leave the appliance unsupervised when in use.
- The appliance must be used only for its intended purpose. No responsibility can be taken for
any possible damage caused by incorrect use or improper handling.
- Children and persons with disabilities are not always aware of the danger posed by the use of
appliances.
- This device can be used by children aged 8 years and older and adults, with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved.
- Cleaning and maintenance must not be made by children without supervision.
Keep the appliance and its cord out of reach of children aged less than 8 years of age when it is
energized or cooling down.
- This device is not a toy, do not leave children or people with disabilities to play with.
In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes,
polystyrene etc.) out of their reach.
- Caution ! Do not allow small children to play with the foil : there is a danger of suffocation !
- From time to time check the cord for damages. Never use the appliance if cord or appliance
shows any signs of damage.
- Never immerse the appliance in water or any other liquid for any reason whatsoever.
- Never place it into the dishwasher.
- Never use the appliance near hot surfaces.
- Do not operate the appliance with a damaged cord or plug, or after the appliance has been
damaged in any manner.
- If the supply cord or appliance is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
- Disconnect the power source cable before any operation of cleaning of maintenance and
accessories assembly.
- Never use the appliance outside and always place it in a dry environment.
- Never use accessories, which are not recommended by the producer. They could constitute
a danger to the user and risk to damage the appliance.
- Never use any other connector than the one provided.
- Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any
way. - Never wind the cord around the appliance and do not bend it
- Ensure that the power cord does not come into contact with hot parts of this unit.
- Make sure the appliance has cooled down before cleaning and storing it.
- The temperature of accessible surfaces may be very high when the appliance is operating.
- Never touch these parts, of apparatus, to avoid burning itself.
EN I STAND FAN WITH REMOTE CONTROL GB580
- Make sure the appliance never comes into contact with flammable materials, such as curtains,
cloth, etc...& the power cord and plug do not come in contact with water.
- Before cleaning, always unplug the appliance from the power supply and let it cool down.
- This appliance is not intended to be operated by means of an external timer or separate
remote-control system. - Always place the unit on a flat surface. Ensure, also, not to cover the
device and not to put anything on it.
- Always remove the plug from the wall socket when the appliance is not in use.
- When using an extension lead always make sure that the entire cable is unwound from the reel.
- Use solely CE approved extension leads. Input power must be at least 16A, 250V, 3000W.
Incorrect operation and improper use can damage the appliance and cause injury to the user.
- This device, designed for home use, complies with standards relating to this type of product.
- The appliance must be used and rested on a table or flat & stable surface.
- The item must not be left unattended when it is connected to main supply.
- The item is not to be used, if it has been dropped or if there are visible signs of damage.
- This appliance is only intended for household use.
SPECIAL WARNING FOR THIS DEVICE:
• Do not carry the unit by holding the power cord.
• Do not insert objects through the protective grill. • Do not use the device in a bathroom
• Always use the fan with the included foot and upright. Warning! Never use without the guards
in place. After assembly, do not remove the guards for maintenance purpose or cleaning.
Description of parts:
1. Front Guard 2. Guard Nut and Screw 3. Fan Blade 4. Rear Guard Central Fixing Nut
5. Rear Guard 6. Speed Control Switches 7. Motor Housing 8. Oscillation Control
9. Motor Spindle 10. Blade Retaining Nut 11. Pivot Screw 12. Pole Retaining Screw
13. Adjustable Pole 14. Pole Clamp 15. Lower Base Pole 16. Screw Cover
17. Base Fixing Screws 18. Base 19. Base End Caps
CONTROL PANEL:
1. Sensor for remote control 2. Indicator Light On function 3. Speed 3 indicator light
4. Speed 2 Indicator light 5. Speed 1 indicator light 6. "Normal Mode" indicator light
7. "Nature Mode" indicator light "Sleep Mode" indicator light 8. 4H timer indicator light
9. 2H timer indicator light 10. 1H timer indicator light 11. 30 minutes indicator light
12. Inactive Button. A key Mode: Normal or Standby B On and Speed selector
C Button timer (each pulse changes the programmed time of use.)
D Stop button of the unit. All indicator lights are off.
REMOTE CONTROL:
OFF button
– turn off the fan
SPEED/ON
– turn on the fan and select required speed. You can choose from three levels:
1. Low fan speed 2. Medium fan speed 3. High fan speed
TIMER
– you can set the time to automatically turn off the fan with this button. The selected off
time is show by its indicator light being on. The time off is adjustable from 0,5 to 7,5 hours. The
off time is shown by the indicator lights – as you can see from the above figure
MODE
– you can select the fan mode. The fan mode is shown by its indicator light being on. You
can select from three fan modes:
NORMAL
the set fan speed is constant
NATURE
the set fan speed varies to simulate a natural air draught
SLEEP
the set fan mode is silent with reduced and variable fan speed
ASSEMBLING:
- Take the two base cross and push the end caps into the ends. Cross them over together
as draw - Remove the four screws from the base and pole the below tube & base to the base.
- Slide the screw cover down over the adjustable and lower base until it’s hide the screws.
- Replace the pole clamp and raise the adjustable.
- Attach the fan assembly on top of the upper tube and tighten it with retaining screw.
- Place the rear guard onto the motor housing and fix it with Central Fixing nut, by screwing back
clock wise. - Slide fan blade onto the motor spindle ensuring that notches on the rear line up
with the splines on the shaft. - Screw on the Blade Retaining Nut in anticlockwise direction.
- Hang the front guard over the top of the rear guard and push the clips inwards until the front
guard is fastened to the rear guard. - Finally fit the nut and screw through the hole in the bottom
edge of the front guard arrowed and tighten it.
USE:
- Unroll the power cord completely. - Check that the tension in force in the country where
you are corresponds to that indicated on the apparatus. - Connect the apparatus in a correct
socket-outlet, (and connected to the ground if the unit is Class I), to avoid any danger. -
Disconnect the power source cable before any operation of cleaning of maintenance and
accessories assembly. Never modify the appliance in anyway.
CLEANING AND MAINTENANCE:
Before cleaning, always: switch off the appliance, disconnect
the apparatus and let it cool. Clean the outside of the apparatus with a sponge or slightly wet
linen. Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
The greasy dirt of the fan fuselage and fan blade should be cleaned so as not to change its colour
or be damaged. Don’t clean it with water directly. Don’t wipe it with acid detergent, lamp oil,
alcohol or chemical cloth in case its colour be changed or go bad.
STORAGE:
Ensure the unit is completely cool and dry.
-Do not wrap the cord around the appliance, as this will cause damage.
-Keep the appliance in a cool, dry place and out of reach from children.
SPECIFICATIONS:
Power supply: 220-240V AC, 50/60Hz Power: 40W
Protective class against electric shock: Class II Noise level: LWA: ~ 53dB
Remote control battery type: 3V CR2025
