5
6. Blade
I) When installing a steel blade, fit the blade as shown in the fig. 7
2) When installing or removing a blade, lock cutter holder with lock handle to tighten or to
untighten
as shown in Fig. 8
NOTE: As the blade fixing bolt is left threaded, tum it counter-clockwise and take a special care
not to hurt your fingers by the blade. Be sure to check if it has been fitted correctly.
Adjust shoulder belt length as you feel appropriate before starting engine.
I. Filling the fuel (Fig.9)
1) This engine uses a fuel mix of 25 parts regular gasoline to I part of two-cycle oil. The fuel
should be premixed prior to pouring into the fuel tank. It is recommended a quality twocycle oil
be used in the fuel mix.
CAUTION:FAILURE TO MIX OIL WITH GASOLINE WILL RESULT IN SEIZURE
AND SEVERE DAMAGE TO THE ENGTNE.
2) Be sure to check bolts and other fasteners to see if any of them have become loose or missing.
OPERATING PROCEDURES
