1
1-800-543-
5454
(
801) 927-3026
Model 3800AP and 3800FC
Installation, Maintenance, and Operating Instructions
Model 3800 Specifications
Feed Speed
3800AP……………………………………...Variable to 15,800 sheets per hour
3800FC…….……………………………......Variable to 12,000 s heets per hour
Paper Length….…………………..…………3-1/2” min to 22” max
Paper Width…….…………………..……….3-7/8” min to 18” max
Paper Weight……………………….………16# bond to 150# card
Continuous Feed Load Capacity…………...1-3/8” of paper
Standard Accessories
3800FC (2) 7-tooth per inch. Perforating wheels. (1) Slitting Wheel. (3) Backup Hubs. (2)
Exit Straps.
3800AP (1) 10-tooth per inch. Perforating Wheel. (2) Scoring Wheels. (1) Stripper. (4)
Backup Hubs. (2) Exit Straps.
Electrical………………………………….115 V 60 Hz (220 V 50 Hz available)
3.5 amp Circuit Breaker
Working Dimensions…………………..….36” x 27-1/2” x 13-1/4”
Shipping Weight………..………………….87 lbs.
Options…………………………….………960 Machine Stand, Perforating Wheels , Scoring
Wheels, Slitting
Introduction
Thank you for selecting the Martin Yale Model 3800. This unit has been designed for fast, easy
operation and will give you years of trouble -free service.
These instructions are applicable to both the 3800 AutoPerf (AP) and the 3800 Forms Cutter (FC).
Operational and setup procedures are the same for each machine. Since the standard accessories
differ, not all accessory setup procedures will apply to each model. The 3800AP is equipped with
a 10-tooth slot typ e perforating wheel, two scoring wheels, a stripper and four backup hubs. The
3800FC is equipped with two 7-tooth slit type perforating wheels, one slitting wheel and three
backup hubs.
Office Zone
1-800-543-5454
