4
3.Throttle cable and stop cord
Put throttle cable and stop cord through cable passage of shaft grip,then connect each terminal
with each proper position respcctively.(Fig.3)
Finally,clamp those connected throttle cable and stop cord together to flexblc shaft with two wire
clamp bands provided.(Fig.4)
4. Haldle (Fig.5)
Remove the handle bracket A.
Set the handle on, and attach the handle bracket A with two bolts slightly. And adjust position of
the handle according to your working style. Then fix it firmly with the bolts.
5. Safety cover(Fig.6)
1) Install the safety cover on the shaft with the safety cover bracket and the screws proivded.
2) Tighten the rcrews after setting the safety cover bracket at the appropriate position.
