__________________________________________________________________________________
Green-GO Quad 4-wire – Quick Start Guide
Pressing the encoder will open the setup menu of the Green-GO Quad 4-wire. Once
in the menu, the encoder will allow you to navigate through the menu and set a
parameter. Pushing the encoder will confirm your selection.
The setup menu offers a range of different settings to modify your device.
The menu sections and their supplementary options are described in detail below.
To Set up a 4-Wire port first select the mode to use. Select a port and scroll down to Set
User/Mode.
4-wire Port x
Set User/Mode:
Line in/out
à
Set up this port as General-Purpose Input and Output. this
mode is used for interfacing with more static systems like a
program audio input which is always active or an external
announcement speaker system
Mode: User
à
Set this port as a full User based port. Audio can be sent into
and out of this port to other communication systems, using
GPIO in-and outputs to trigger routing, calls and cues. Select
one of the users from the current config to load all channel
settings for this user.
Setup menu navigation
Setup menu overview
Set up a 4-wire port