__________________________________________________________________________________
Green-GO Quad 4-wire – Quick Start Guide
Set up General Purpose In- and Outputs
In the GP input/output menu you can set up the GPIO of this 4-wire port to interface with
and trigger external communication systems. Each 4-wire port has a 9-pin sub D connector
available with 2 inputs and 2 outputs.
In x
à
Set up one of the two inputs.
Func
à
Set up the function that is triggered by this input
Talk
à
Set up this input to trigger A talk.
Call
à
Set up this input to trigger a Call
Cue
à
Set up this input to Acknowledge or send an Attention, Hold
.
or GO
Option
à
Set up on which channel this trigger is active.
Func: Talk
à
Either Answer the current active channels or select one
specific channel.
Func: Call
à
Select the channel to call
Func: Cue
à
Select which cue signal to send
Acknowledge
à
Send an acknowledge to the incoming cue
Send ATT Chn
à
Send an attention to one specific channel
Send Hold Chn
à
Send a hold signal to one specific channel
Send GO Chn
à
Send a GO signal to one specific channel
Normally
à
Set up the NOT active state of this input.
Out x
à
Set up one of the two outputs
Func
à
Set up the function that will trigger this Output
Active
à
An active channel will activate this output
Call
à
A call will activate this output
Cue Receive
à
Set up an output to be active when a Cue is received.
Talk
à
A local active talk will activate the output
Option
à
Set up on which channel this trigger is active.
Func: Active
à
Either Any channel or select a specific channel
Func: Call
à
Either Any channel or select a specific channel
Func: Cue Rec
à
Select which cue signal will trigger the output
Hold
à
Output is active when a Hold is active
Hold Blink
à
Output is blinking when a Hold is active
Att
à
Output is active when an Attention is active
Att Blink
à
Output is blinking when an Attention is active
GO
à
Output is active when a GO is active
Go Blink
à
Output is blinking when a GO is active
Hold /Att Blink
à
Output is active when a Hold is active and
blinking when an Attention is Active
Hold Blink /Att
à
Output is blinking when a Hold is active and
active when an Attentions active
Hold /GO
à
Output is active when a Hold or GO is active
Att / GO
à
Output is active when an Attention or GO is
