__________________________________________________________________________________
Green-GO Quad 4-wire – Quick Start Guide
one of the available Groups in the Green-GO network on the Program
audio channel. Local IFB will send the input of the 4-wire port to the
Program audio of this port .This audio stream is not Available on the
Green-GO network.
Src
à
Select the Group as program audio source. Not available in Local IFB
Vol
à
Set the volume of the program audio. The range Mute, -36 dB
through 12 dB
Dim
à
This will Attenuate the program audio whenever one of the
Channels including announcement and emergency is active. range is
from 0 dB to -24 dB and MUTE option.
Audio In/Out
Output
à
Set the output level of the Audio Output. Range is MUTE, -42 to 6
dB.
LoopBack
à
Set the ratio of audio feed back from the input back to the output.
range is 0 to -39 dB or turn it off.
AutoGain
à
Set the dynamic amplification to avoid distortion. Available settings
are Slow/Med/Fast/Off. If AutoGain is turned off the Max Gain
becomes gain.
MaxGain
à
Set the maximum gain of the input signal - range is from -12 to 28
dB.
Threshold
à
Set the gate function for this input. the threshold is the level
required for the input signal to be transmitted – editable range is
from -45 to -20dB or turned Off.
Hold
à
Set up the Gate hold time for this input. Options:
Fast/Med/Long/XLong
In
à
Set up the input source for this input. Line In or a 125 Hz to 4 kHz
test tone
