page 7 of 20
Copyright © 2020 Green-GO
MCXD user guiDe
GO
Now your presets will look like this:
- 1st preset: IN: Front Mic – Mic Pwr: On - Thld: -35dB - 2nd preset: IN: Headset – Bias: Off – Thld: -20dB
So in short, select the preset to edit, make your changes and they will automatically be saved. Exit the menu to select
the desired Audio Input..
Assign a group to Program Audio
Program Audio allows you to set a group as the underlying audio source. This could be Stage Sound or any other group. To
assign a group as the Program Audio go to Setup Menu/Program Audio/Src: Scroll to the desired Group and Select it.
Assign Line In to a Group
Go to Setup Menu/Line In-Out/Line In/Group and scroll to and select the desired Group to assign the Line In to.
Assign a Group to Line Out
Go to Setup Menu/Line In-Out/Line Out/Group and scroll to and select the desired Group to assign to Line Out. A couple of
things to consider;
– If you want the Line In audio to be included on Line Out set a volume on Audio Settings/Line In-Out/Line Out/
Loopback. Setting Line In and Out to the same Group will prevent loopback as Group will not Output it’s own
audio.
– If you need your main mix (e.g. what you hear in your headset) also available on a Line out, then set the Main
Mix volume. This can be done in Setup Menu/Line In-Out/Main Mix Output This will mix the main mix with
what ever is selected for the line out.
Adjust the Volume and Mute
– Turning the Pushknob will adjust the Main volume.
– Pressing on the Channel No./Group name on the TFT Touchscreen and simultaneously turning the Pushknob
will adjust the volume of that Channel No./Group
– Pressing on a Groups Volume indicator will Mute/UnMute that Group.
– The volume of the individual channels can also be set in the Setup menu.
– The setting ranges from MUTE over -36dB to 12dB with 0dB as default.
– To do this enter the Setup menu, Scroll to Channel Assignment and Click ’Enter’.
– Scroll to the desired channel and Click ’Enter’.
– Scroll to volume and Click ’Enter’.
– Scroll to the desired setting and Click ’Enter’.
Talk
Press the Pushbutton next to the part of the TFT display that show the channel you want to talk to. A short press will enable
Talk and requires another press to disable Talk again. (Latch functionality) A Long press will enable Talk until the button is
released again.(Momentary functionality)
