Green-Go GGO-MCXD, User Manual

Page: 18 / 20

page 18 of 20 Copyright © 2020 Green-GO
MCXD user guiDe
GO
nected bridge fails it will reconnect Off, 0.0.0.1
– SndBuf: // Set the buffer to compensate for internet jitter
– Default, Small, Normal, Large
– RecvBuf: // Set the buffer to compensate for internet jitter. Auto will adjust according to connection.
– Default: Auto, Small, Normal, Large, Save //Saves the connection settings
– Cancel //Go Back
OR
– Master Connection: //Master connection is used when connecting Extensions to the Deskstation
– // A click here will send you to Local/Remote/Latency/Master connection choice menu.
– Default: Auto Range: Auto,1 – 9 Save //Saves the connection settings
– Cancel //Go Back
– Clone Config //Clone a configuration file from the network or load the Factory Default
– Cancel // Go Back
– ’Configuration File A-Z’ Factory Default
– Device Options
– Exit //Go Back
– Backlight: //Set timeout for LCD Touchscreen backlight
– Default: 10 min Range: Always On, 10 sec, 30 sec, 1 min, 10 min, 30 min, 1 Hour, 2 Hours.
– Screen Bright: //Set LCD Touchscreen brightness
– Default: 6 Range: Low, 2, 3, 4, 5, 6, 7, Max
– LED Bright: //Set the brightness for the Pushbutton LED
– Default: 6 Low, 2, 3, 4, 5, 6, 7, Max
– Speaker: //Set the Front speaker volume
– Default:-12Db Range:MUTE,-48dB,-45dB,-42dB,-39dB,-36dB,-33dB,30dB–0dB
– Headset: //Set headset speaker volume
– Default:-12Db Range:MUTE,-48dB,-45dB,-42dB,-39dB,-36dB,-33dB,30dB–0dB
– ChnBtn Talk: //Set the function of the Channel Pushbutton - Talk function or Talk, Call and Cue when in
either Listen, Call or Cue mode.
– Default: Talk Range: Talk - Talk/Call/Cue
– Shift Page Enable/Disable // Enable or disable page change using the Shift Pushbutton
– Network
– Dynamic: //Choose dynamic network settings or configure your own.
– Default: ON
– OFF:
– IP address: 169.254.181.58
– Netmask: 255.255.0.0
– Gateway: 0.0.0.0
– Save //Save the settings
– Cancel //Go Back
– Save //Save network settings
– Cancel //Go Back
– Info //Shows information about the unit
– Name set //The Name of the Unit. Can be set in the Green-GO Control or Connection software
– Access Protection //Shows the access protection that has been set in the Green-GO Control software
– SN: 214 //Unit serial number
– MCXD 4a45 //Firmware version
– MCXD 4a45 //Firmware version
– Jun 12 2049 //Firmware release date
– 13:01:02 //Firmware release time
– IP: 169.254.181.58 //Device IP