page 12 of 20
Copyright © 2020 Green-GO
MCXD user guiDe
GO
Latch (also used in connection with Momentary)
A latch press will toggle the current talk state. A simple button-press to enable and another button-press to disable.
Listen Mode
If in Listen mode the user has the option to listen to/mute a channel. If the Channel Pushbutton has been set to Talk/Call/Cue
it is necessary to be in Listen Mode to allow the Channel Pushbutton to work as a Talk button.
Listen on Talk
If Listen on Talk is on, Talking on a Muted channel will be temporarily un-mute the channel for the reply to be heard. Local
connection Normal operating mode.
Master connection
The Deskstation has extensions connected to it as slaves and works as their Master.
Mic Kill
A function that can be assigned to a Channel Pushbutton. It allows the user to temporarily switch off the Speech Input from a
Microphone or Headset.
Power Over Ethernet
is what it says. The power to the units is supplied by the PoE switch via the Ethernet cable. This could be Antennas, Desk
stations, Wired beltpacks etc.
Popup
Popups occur when receiving a Cue or Direct Call. The behavior of Popups can be set in Setup Menu: ‘Options/Popup’
Priority
A priority can be set for each channel. A higher priority channel will override a lower priority channel. Levels are from lowest
to highest: Program audio, Low, Normal, High, Announce and Emergency. When a channel with higher priority becomes ac-
tive, the lower priority channels will be dimmed according to the setting in Setup Menu: ‘Options/PriorityDim’. The exception
to dimming settings is Emergency, which Mutes all other channels.
Remote connection
This connection is chosen when connecting to a remote site via a bridge at that location.
Program Audio
Your background sound; it can be any user, group or the analog audio input (Line In) from e.g. the Deskstation or the Inter-
face X
