page 6 of 20
Copyright © 2020 Green-GO
MCXD user guiDe
GO
– scroll to select the desired Configuration file. The Factory default configuration file can be found at the end of
the list.
– Click ’Enter’ to load the Configuration file.
Assign channels
– You can assign Users or Groups to any of 32 available channels.
– Enter the Setup menu. Scroll to ’Channel Assignment’ and click ’Enter’.
– Scroll to the channel you want to assign a Group or User to and click ’Enter’ Scroll to ID and click ’Enter’.
– Scroll to select what you want to assign; Group, User or None. Click ’Enter’ A list of available Groups or Users
will appear.
– Scroll to the desired Group or User and click ’Enter’
Load Audio Profile
– Enter the Setup Menu and go to Audio Settings/Load Profile. Click ’Enter’
– Scroll to select the desired profile. The default audio profile file can be found at the end of the list.
– Click ’Enter’ to load the profile.
Assign functions to the Channel Pushbuttons
You can assign different functions to the Pushbuttons.
– Press and hold the Shift Pushbutton. All Pushbuttons that can be assigned a new function turns magenta.
– Now press the desired Pushbutton.
– In the top left TFT screen a list of functions that can be applied appears.
– Using the Pushknob, scroll to the one you want and select it by pressing the Pushknob. See page 3 for func-
tions and explanations. Audio Input Select is described further below.
Audio Input Select
Example:
You want to make a preset for a Headset and one for a Front mic. To avoid to much confusion, all we want to change
is IN (the Audio Input) and the Bias (Mic power)
To start with both presets are similar: (The underlined is the active one)
- 1st preset: IN: Headset – Bias: Off - 2nd preset: IN: Headset – Bias: Off You go to the Setup Menu/Audio settings
and select: IN: Front Mic – Mic Pwr: On (The bias setting automatically changes to ‘Mic Pwr: On’, when ‘Front Mic’ is
selected.) Exit the menu.
Notice that the touchscreen next to the pushbutton you assigned Audio Input Select to, now reads ‘Front Mic’ Now
you have two visible different presets that you can cycle between using the pushbutton:
- 1st preset: IN: Front Mic – Mic Pwr: On - 2nd preset: IN: Headset – Bias: Off
Now we want to change the Threshold of the 2nd preset.
- Press the pushbutton so it reads ‘Headset’. Enter the Setup menu and go to Audio settings/Thld and change the
value to -20 dB. Exit the menu.
