10
Skecth map of installation
D(with solar,floor heater and water tank)
Fig. 6
Skecth map of installation
E(only with floor heater)
Ducted
Fig. 7
Several kind of installation modes have been introduced the whole system is made up of the following
main parts: outdoor unit, Hydro
-box
,water tank.,indoor units Furthermore,system has an interface for the
floor heater and the solar . User can make it work according to skecth map of installation B C D and E
:
Notice
1.After floor heating request has be sent to Hydro
-box
, if user open indoor unit for cooling or heating, system will ignore the
request of indoor unit ,and at the same time error code E7 will show on the wired controller of indoor unit.
2. In Skecth map of installation B and D, if user open the floor heater and hot water heater together, system will first go to
heat water tank until water temperature reach the setting temperature or reach over 50 degree.
Summary of Contents for GMV-Pds100W/Na-K
Page 17: ...17 ...
