Gree GKH12K3BI, Service Manual

Page: 56 / 209

53
U-MATCH Air
Conditioners
Service Manual
Insulating layer of
condensate pipe
Pipe cover
)LJXUH
1.1.7 Installation of air pipes and openings
Caution:
‹ The air supply pipe, the air intake pipe and the fresh air pipe must be covered with a layer of thermal
LQVXODWLRQVRDVWRDYRLGWKHUPDOOHDNDJHDQGFRQGHQVDWLRQ)LUVWO\DSSO\OLTXLGQDLORQWKHSLSHVWKHQ
DWWDFKWKHWKHUPDOLQVXODWLRQFRWWRQZLWKDOD\HURIWLQIRLO8VHWKHOLTXLGQDLOFRYHUWR¿[LW/DVWO\XVHWLQIRLO
adhesive tape to carefully seal the joints; other good thermal insulation materials can also be used.
‹ 7KHDLUVXSSO\SLSHVDQGWKHDLULQWDNHSLSHVVKDOOEH¿[HGWRWKHSUHIDEULFDWHGERDUGVRIWKHFHLOLQJE\
using iron supports. The joints of the pipes must be sealed by glue so as to avoid leakage.
‹ The design and installation of air pipes must be in conformity with the relevant state engineering criteria.
‹
7KHHGJHRIWKHDLULQWDNHSLSHPXVWEHDWOHDVWPPDZD\IURPWKHZDOO7KHDLULQWDNHPXVWEHFRYHUHG
ZLWK¿OWHU
‹
Silencing and shock absorption shall be considered in the design and installation of the air pipes.
Additionally, the noise source must be far away from where people stay. The air intake shall not be located
DERYHWKHSODFHZKHUHXVHUVVWD\RI¿FHVDQGUHVWSODFHVHWF
1. Installation of air supply duct
‹ Installation of rectangular air duct, as shown in Figure 1-1-11
Figure 1-1-11
No. Designation No. Designation
1 Hanger rod 5 Filter screen
2 Return duct 6 Main air supply duct
3 Canvas duct 7 Air outlet
4 Return air inlet