B –7 THROTTLE
27
THROTTLE setting
Set up this feature to display the rpm data in the Display Mode.
The rpm signal can be inputted by using the optional External Input
Signal Harness (sold separately) or through the e-manage unit.
SELECT
Select the rpm input signal
source.
Select ANALOG CH1,
ANALOG CH2 or e-manage
SETTING
NOW - - - Throttle voltage signal and position will be displayed
MIN - - - - Minimum Voltage when throttle is closed. (0% throttle
position)
MAX - - - Maximum voltage when throttle is fully opened. (100%
throttle position)
Program the MAX setting by turning on the ignition and
holding the throttle fully opened and pressing OK to
confirm.
• MIN setting will be set automatically.
• If the THOTTLE SENSOR TYPE in INITIAL SETTING is not
selected properly, the rpm signal will display backwards.
• This feature will not work on a vehicle with out throttle position
signal
e-01英語版 03.3.19 20:29 ページ 28