GREAT PLAINS PL5500, Operator'S Manual, Page: 29 / 109

Great Plains | 411-633M | 10/21/2021 22
PL5500 Planter Table of Contents Index Operation
4. On the console, on the MAIN SCREEN, tap the
FOLD SEQUENCE
icon.
5. On the console, on the FOLD SEQUENCE
screen, tap FOLD icon.
6.
After tapping the
FOLD icon, the icon will change
to a blue color, and it will change slightly in
appearance, as shown. This will indicate the fold
hydraulics are active, and are ready to be
engaged.
7. With the blue icon indicating active fold
hydraulics on the console, extend tractor circuit
fold lever to fully extend the fold cylinders (3) until
the left and right wings are in-line with the center
frame.
8. Rephase the fold cylinders by continuing to
extend and hold, the tractor circuit fold lever for
an additional 30 seconds after the fold cylinders
are fully extended.
9. Extend the tractor circuit lift lever to extend the lift
cylinders until the planter is fully raised.
10. Set the tractor circuit lift lever to neutral to hold at
a lift.
11. If installed, remove cylinder locks from the lift
cylinder rods.
12. When unfolding is complete, the outer wing
gauge wheels must be fully lower by extending
the tractor circuit lift lever.
13. When the planter is in the correct position, with
wings fully unfolded, the wing gauge wheels
lowered to the ground, and the cylinder locks
from the lift cylinder rods removed, tap the blue
FOLD
icon.
14.
After tapping the
FOLD
icon, the icon will change
to a gray color, and it will change slightly in
3
3
68686